EMS Hardware Monitors (logo)

Release Notes for EMS Hardware Monitors (February 1999)

These release notes cover the February 1999 (IPR 9902) release of the Diagnostic/IPR Media for HP-UX 11.00/10.20 running on S800/S700 systems.

Overview

Included on the Diagnostic/IPR Media CD-ROM are the EMS Hardware Monitors - an important tool for maintaining system availability. The EMS hardware monitors allow you to monitor the operation of a wide variety of hardware products and be alerted immediately if any failure or other unusual event occurs. Hardware event monitoring is available to users running HP-UX 10.20 or 11.X (IPR 9902 and later).

Hardware event monitoring provides a high level of protection against system hardware failure. By using hardware event monitoring, you can virtually eliminate undetected hardware failures that could interrupt system operation or cause data loss.

Enabling Hardware Monitoring

The EMS Hardware Monitors are installed with the Support Tools Manager. Once the monitoring software is installed you simply need to enable hardware monitoring and all supported hardware devices on your system will automatically be monitored.

To enable hardware event monitoring:

  1. Run the monitoring request manager by typing: /etc/opt/resmon/lbin/monconfig
  2. From the main menu selection prompt, enter E(nable Monitoring)
That's it. Event monitoring is now enabled.

The default monitoring requests will automatically provide the following notification methods for all monitors:

   All events sent to text file /var/opt/resmon/log/event.log
   Serious and Criticial events sent to SYSLOG
   Serious and Criticial events sent to CONSOLE
   Serious and Criticial events sent to EMAIL address root
The Hardware Monitoring Request Manager, /etc/opt/resmon/lbin/monconfig, can be used to customize the monitoring requests and add new ones.

The Peripheral Status Monitor (PSM) is configured differently. They use the EMS GUI. See: http://docs.hp.com/hpux/onlinedocs/diag/ems/ems_gui.htm

Documentation

For the latest and most complete information on EMS Hardware Monitors and the Support Tools Manager (STM), see the Web page "Diagnostics":

          http://docs.hp.com/hpux/diag/
At this site, you will find Overviews, Tutorials, Quick Reference Cards, Frequently Asked Questions (FAQs), and much other material.

For complete information on installing and using EMS hardware monitors, as well as a list of supported hardware, refer to the "EMS Hardware Monitors User's Guide" available at the above site. An electronic copy of this book is also included on the Diagnostic/IPR Media CD-ROM in the /Documentation directory.

Changes

The EMS Hardware Monitors were initially released in IPR 9902 (Feb 1999).

Known Problems

CAUTION: Monitoring Changes for disc30, sdisk and disk array devices

As of IPR 9902 (Feb 99 release), there has been a change to the way that monitoring is done for disc30, sdisk and the HA Disk Array Models 10, 20, and 30FC.

Formerly, the "diaglogd exec" programs (pdisc30_exec, pharaymon_exec, and psdisk_exec) handled driver error entries for these devices.

As of IPR 9902, these programs have been deleted and their functionality is now provided by the EMS Hardware Monitors.

If you had customized the configuration files for the dialogd exec programs (disk30_exec.cfg, sdisk_exec.cfg, and haraymon_exec.cfg) you may wish to re-configure the EMS Hardware Monitors to achieve the same results.

CAUTION:Compatibility Problem with ServiceGuard and LockManager

From the February 1999 release (IPR 9902) onwards, the Support Tools (diagnostics) include EMS hardware monitors and EMS version A.03.00 on both HP-UX 10.20 and HP-UX 11.00.

This version of EMS is incompatible with ServiceGuard A.10.10, which includes version A.01.00 of EMS. It is also incompatible with ServiceGuard and LockManager versions A.11.01, A.11.02 and A.11.03, which include version A.02.00 of EMS.

If you run these releases of ServiceGuard or LockManager, you must upgrade them before installing the Support Tools on the February 1999 (IPR 9902) or newer releases.

On HP-UX 10.20 you should upgrade ServiceGuard to A.10.11 and on HP-UX 11.00 you should upgrade ServiceGuard or LockManager to release A.11.04 or newer.

If you do not upgrade, EMS will silently be upgraded to version A.03.00 when you install the diagnostics; ServiceGuard and LockManager will fail to work if you have any monitored resources. In this case, if you execute swverify or other SD-UX commands, you will see error messages like:

     The corequisite
     "EMS-Core.EMS-CORE,r=A.01.00,a=HP-UX_B.10.20_800,v=HP" for
     fileset "Cluster-Monitor.CM-CORE,l=/,r=A.10.10" cannot be
     successfully resolved.
If you have already loaded the diagnostics and therefore upgraded to EMS A.03.00 and are still running an incompatible release of ServiceGuard or LockManager, you should now upgrade to get your system into a supported and working state.

There is no functional difference between ServiceGuard A.10.10 and ServiceGuard A.10.11, other than support for the new version of EMS and bug fixes. Functional differences for the 11.00 releases of ServiceGuard and LockManager can be found in the release notes.

Older versions of ServiceGuard and LockManager, for example A.10.06 and A.10.07.01, do not provide any support for EMS, and so are not affected by this issue.

Monitors Provided

Monitors are provided to support the following:

In addition, a Hardware status monitor is provided to monitor the current status of the products supported by the above list.

For detailed information concerning which products are supported by which monitors and additional dependencies, check the "Diagnostics" section of Hewlett-Packard's online documentation web site at http://docs.hp.com/hpux/diag/ .

Monitor Dependencies

Several of the monitors have special requirements, such as patches or certain versions of firmware. Current requirements are described in the "Supported Products" page under "EMS Hardware Monitors" at http://docs.hp.com/hpux/diag/ . Requirements are also listed in chapter 2 of the manual "EMS Hardware Monitors User's Guide".

Note: The Fibre Channel Arbitrated Loop Hub Monitor requires special configuration which is described in its data sheet in the "EMS Hardware Monitors User's Guide" (chapter 6).

Defect Reporting

Use CHART to report defects in the EMS Hardware monitors. The project name is diag.hw_mon.hpux. If you don't have access to CHART, contact an HP representative to enter a defect for you.

SD Product Structure

The EMS hardware monitors are installed as part of the OnlineDiag bundle (product number B4708AA). In addition, they utilize the EMS framework, product number B7609BA.

Note: EMS Hardware Monitors are installed as part of the STM-UUT-RUN Fileset. However, the EMS Hardware Monitors are dependent on the EMS-Core and EMS-Config products and additional filesets in the Sup-Tool-Mgr Product.

For information on the STM product, refer to the STM release notes file /usr/sbin/stm/Rel_NOTES.STM.

SD Bundle: OnlineDiag
   Description: On-line Diagnostic System (Series 800/700)

   SD PRODUCT: Sup-Tool-Mgr
      Description: Support Tools Manager for HP-UX Systems

      SD SUB-PRODUCT: Manuals
      Description: Support Tools Manager Manual Pages

         FILESET: RELEASE_NOTES
            Description: HPUX STM Release Notes

         FILESET: STM-MAN
            Description: HPUX STM Manual Pages

      SD SUB-PRODUCT: Runtime
      Description: STM Manual Runtime

         FILESET: STM-CATALOGS
            Description: HPUX STM Shared Libraries

         FILESET: STM-SHLIBS
            Description: HPUX STM Shared Libraries

         FILESET: STM-UI-RUN 
            Description: HPUX STM User Interface
         
         FILESET: STM-UUT-RUN
            Description: HPUX STM Unit Under Test Runtime 

   SD PRODUCT: EMS-Config
      Description: EMS Config

         FILESET: EMS-GUI
            Description: Event Monitoring Service Graphical 
                         User Interface

   SD PRODUCT: EMS-Core
      Description: EMS Core Product

         FILESET: EMS-CORE
            Description: Event Monitoring Service Core Files
Top of Page

/ Diagnostics HOME

URL: http://docs.hp.com/hpux/onlinedocs/diag/ems/emr_9902.htm
Last updated: Thu May 17 16:50:20 PDT 2001