Internal Processing Messages Logged by PMON

Monitoring E1/T1 port %d on card %d

This message indicates that PMON has found an active E1 or T1 port to monitor.

No E1/T1 ports to monitor at this time

This message indicates that PMON is running but that it found no E1 or T1 lines to monitor at this time.

Card %d port %d status: %s

A status message has been received from the indicated card and port. See the previous section for status messages specific to the E1/T1 line monitoring function.

Card %d port %d write completion: %s

Not expected. Indicates a possible application problem with PMON.

Unexpected message type %d received

Not expected. Indicates a possible application problem with PMON.

E1/T1 port monitor terminated

PMON has deleted it's line monitoring devices and terminated.

Cannot read the system default message file

There is a problem reading the /opt/acc/msg/default.msg file.

Status returned from zcntl on zlu %d: %s

This status response was received when attempting to configure an E1/T1 line monitoring device.

Device type E1T1_PORT not known in this system

The /opt/acc/cfg/zcomdevice file does not contain the E1T1_PORT device definition. The definition for E1T1_PORT should look like: