- HP_APAPORT_CONFIG_MODE
Set the configuration mode
for a physical port. The supported values are as follows:
For a description of these parameters, see the mode
descriptions in “Preparing for Configuration”.
- HP_APAPORT_GROUP_CAPABILITY
For FEC_AUTO
only. An integer value used to determine which network physical ports
can be aggregated into a common PAgP link aggregate. Set the group capability to be the same for all network physical
ports. The group capability must match the group capability of the
desired aggregate that the user wants the port to join. This value
is set in the /etc/rc.config.d/hp_apaconf file. “Link Aggregate Advanced Parameters” describes how
to choose the group capability for link aggregates. Ports going to
different link aggregates should have different group capabilities.
The default group capability is 5.
- HP_APAPORT_INTERFACE_NAME
Name of physical interface.
For example, lan0 and lan1.
- HP_APAPORT_KEY
For LACP_AUTO only. An integer
value that determines which network physical ports can be aggregated
into a common LACP link aggregate. Set the key to be the same for all network physical ports. The key must match
the key of the desired aggregate that the user wants the port to join.
This value is set in the /etc/rc.config.d/hp_apaconf file. “Configuring a Link Aggregate” describes
how to choose the key.
The default administrative
key is 0.
- HP_APAPORT_PRIORITY
Set the port priority for
the port. The port priority determines which port in a link aggregate
will be the interface when the link aggregate is set to Hot Standby
mode (HP_APA_HOT_STANDBY=on).
The default port priority is 0.
- HP_APAPORT_SYSTEM_PRIORITY
For LACP_AUTO only. Set
the port system priority for the port specified by HP_APAPORT_INTERFACE_NAME. The system priority gives control to the system to resolve waiting
ports to be added in a link aggregate.
The
default system priority is 0.
Printable version
