Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 HP 9000 Networking: Installing and Administering 100VG-AnyLAN/9000 > Chapter 1 Installing and Configuring 100VG-AnyLAN/9000

Step 5: Install the 10/100VG Card
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

spacerspacerspacer
spacer
spacer
  		 
 

Follow the steps below to install the 10/100VG card.

  1. Grasp the card by its edges or faceplate with both hands.

  2. Slide the card into the EISA slot.

  3. Press the card firmly into place until you feel it mate fully.

  4. Secure the card by replacing the slot cover screen.

  5. Reassemble the workstation.

NOTE: For systems with multiple slots, HP recommends installing add-on LAN cards in the lower slots in the system backplane and add-on 10/100VG cards in the higher slots in the system backplane. Always install cards in the lowest available slot.


Step 4: Access the Workstation Card Bay
  		 


Step 6: Attach the Workstation to the Network  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1996 Hewlett-Packard Development Company, L.P.