100-Mbit Twisted-Pair Connector

Use unshielded twisted-pair cables that comply with the IEEE 802.12 100-Mbit/s proposed standard.




	NOTE: In the following table TPIO stands for twisted pair input/output.

Table C-2 IEEE 802.12 100-Mbit/s Proposed Standard

Pins	Signal - Hub	Signal - End Node
1	TPIO:3+	TPIO:0+
2 (pair 2)	TPIO:3-	TPIO:0-
3	TPIO:2+	TPIO:1+
6 (pair 3)	TPIO:1+	TPIO:2-
4	TPIO:1-	TPIO:2-
5	TPIO:2-	TPIO:1-
7	TPIO:0+	TPIO:3+
8 (pair 4)	TPIO:0-	TPIO:3-

Available HP Cables:

HP 92268A - 4 meter with attached 8-pin connectors.
HP92268B - 8-meter with attached 8-pin connectors.
HP 92268C - 16-meter with attached 8-pin connectors.
HP 92268D - 32-meter with attached 8-pin connectors.
HP 92268N- 300-meter (no connectors supplied).

Cable Lengths:

The maximum length of the cable from the hub to each node is 100 meters for category 3 UTP and category 4 UTP and 150 meters for category 5 UTP. For additional information on cable lengths and number of nodes supported by 100VG-AnyLAN, refer to the HP Advance Stack 100VG Hub-15 Installation and Reference Guide.

100-Mbit Twisted-Pair Connector

Technical documentation

» Table of Contents

» Glossary

» Index