Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
Designing Disaster Tolerant High Availability Clusters: > Chapter 2 Building a Campus Cluster Using FibreChannel and MC/ServiceGuard

Two Data Centers with FibreChannel Point-to-Point

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

Although this architecture should work with the maximum number of nodes allowed in an MC/ServiceGuard cluster, this cluster architecture has been tested with a maximum of 4 nodes and dual lock disks. Therefore, the configuration currently supported is 2 nodes per data center as shown in Figure 2-2 “Two Data Centers with FibreChannel Point-to-Point”.

Figure 2-2 Two Data Centers with FibreChannel Point-to-Point

Two Data Centers with FibreChannel Point-to-Point

Disks in the configuration can be HP SureStore E XP Series disk arrays or EMC Symmetrix arrays. Each array must contain one of the dual cluster lock disks. Host connections to the disks must be made using redundant links (PV links).

The maximum distance between nodes is 10 kilometers using long-wave hubs between the disk arrays. Therefore, this configuration can be used for both campus clusters and metropolitan clusters.

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© Hewlett-Packard Development Company, L.P.