Dimensions

Uncrating Space

rp54xx systems are shipped in boxes on a 34.75 in. x 26 in. (88.25 cm. x 66 cm.) pallet. The combined height of the packaged container and the pallets is 23.25 in. (59 cm.).

Allow a circular area approximately 5 ft. (2 m.) in diameter room for uncrating the system. Allow additional space for temporary storage of the shipping containers and packing materials.

Space Requirements

A minimum access area of 2 ft. (0.7 m.) in all directions is required for serviceability.

Computer Room Physical Space Requirements

Server

The A5537A, A5538A, or A5539A cabinets in which the server resides is 38.5" deep by 23.5" wide, with heights as follows:

A5537A 1.2 meter rack - 49.5"
A5538A 1.6 meter rack - 63.5"
A5539A 2.0 meter rack - 77.5"

The cabinet anti-tip feet (required for safety) extend the depth an additional 10" in the front and 14" in the back. The minimum standalone physical space for the rp54xx server in a cabinet is shown in the following illustration:

For service access, the server slides on rails 28" beyond the edge of the chassis in the front. An additional minimum of 3' of workspace on all sides is required for servicing the server.

Aisle Space

The minimum aisle space between rows of installed HP rp54xx server/cabinets is 3 feet, front and back, for airflow and serviceability.

Computer Room Unpacking Space

Specify Uncrating Space

rp54xx Systems are shipped in integrated cabinets on a 34.75" (88.25 cm.) x 26" (66 cm.) pallet. The combined height of the packaged container and the pallets are as follows:

1.1 meter rack - 60 inches
1.6 meter rack - 73 inches
2.0 meter rack - 87 inches

Allow room (a circular area approximately 12 feet (3.5 meters) in diameter) for uncrating the system and rolling the cabinet off the pallet on rails. Allow additional space for temporary storage of the shipping containers and packing materials..