Some
BIOS settings shown in Table 3–3 in the HP XC Hardware Preparation Guide for the
HP ProLiant DL140 G2 nodes are incorrect.
Table 3-1 lists only the corrected information; all other
BIOS settings shown in Table 3–3 in the HP XC Hardware Preparation Guide are correct.
Table 3-1 Corrected BIOS Settings for the HP ProLiant DL140 G2 Nodes
| Menu Name | Submenu Name | Option Name | Set To This Value |
|---|
Boot | | Boot order | Set
the following boot order on all other nodes: CD-ROM Removable Devices PXE MBA V7.7.2 Slot 0200 (not Slot 0300 as incorrectly shown in the manual) Hard Drive
|
| | | PXE Booting | On all other nodes, disable PXE booting
by inserting an exclamation point (!) at the beginning of the following
entry so that PXE booting is accomplished using Slot 200 (NIC 1): Do not disable Slot 0200 as incorrectly
shown in the manual. |
Printable version
