This section discusses software prerequisites for installing
the Online Diagnostics software. It also lists the supported hardware
and any special requirements they have.
Following are the prerequisites for installing the Online Diagnostics
software:
HP Serviceguard
version A.11.04 or later for package failover
Both requirements are available on the Operating Environment
(OE) media.
Table 2-1 lists the supported disk array devices and their requirements.
Table 2-1 Disk Arrays
| Product | Model/Product Number | Special Requirements |
|---|
HP AutoRAID Disk Array Supported
by AutoRAID Disk Array Monitor (armmon) | | HP-UX 11i v1 (PHCO_23263)
ARMServer version |
HP High-Availability Disk
Array: Supported by High-Availability Disk Array Monitor (ha_disk_array) | | None |
HP Fast/Wide SCSI Disk Array:
Supported by Fast Wide SCSI Disk Array Monitor (fw_disk_array) | C243XHA | None |
HP Fibre Channel High-Availability
Disk Array: Supported by Disk Array FC60 Monitor (fc60mon) | HP SureStore E Disk Array
FC60 |
| HP-UX 11i v1
(PHCO_26824) |
HP StorageWorks
Modular SAN Array 1000 HP StorageWorks Modular SAN Array
30 Supported by HP StorageWorks Modular SAN Array 1000
Monitor (msamon) | HP StorageWorks Modular SAN Array 1000 HP StorageWorks Modular SAN Array 30 | Starting with the HP-UX 11i v1 June 2004
release and the HP-UX 11i v2 September 2004 release, MSA 1000 is supported
on the following cards: A9782A (2 GB/s, 64-bit PCI Dual Channel) A9784A (2 GB/s, 64-bit PCI Dual Channel)
Starting with the HP-UX 11i v2 March 2004 release,
Modular SAN Array 30 is supported on the following cards: A6795A (2 GB/s, 64-bit 66 Mhz PCI) A6826A (2 GB/s, 64-bit PCI Dual Channel)
|
HP StorageWorks Modular SAN Array 60 HP StorageWorks Modular SAN Array 70 Supported
by HP StorageWorks Modular SAN Array 60/70 SAS Enclosure Monitor (msamon_sas) | HP StorageWorks Modular SAN Array 60 HP StorageWorks
Modular SAN Array 70 | Starting
with the HP-UX 11i v2 March 2008 release and the HP-UX 11i v3 March
2008 release of OnlineDiag, msamon_sas monitors HP StorageWorks Modular SAN Array 60 and HP StorageWorks
Modular SAN Array 70 on HP SC44Ge Host Bus Adapter (SAS HBA).  | | | |  | NOTE: The msamon_sas monitor is supported
only on HP Integrity ®systems. | | | | |
|
The Disk Monitor (disk_em)
supports all disks bound to the sdisk and disc30 drivers, and not
controlled by another event monitor, such as a disk array monitor.
Hitachi XP128, XP256, XP512, XP1024 drives, and EMC Symetrix drives
are not supported. These devices are monitored by other monitors.
Table 2-2 lists the supported High-Availability storage systems.
Table 2-2 High-Availability Storage Systems
| Product | Model/Product Number | Special Requirements |
|---|
HP High-Availability Storage
System: Supported by High-Availability Storage System Monitor (dm_ses_enclosure) | 1010D | None |
HP SureStore E Disk System:
Supported by High-Availability Storage System Monitor (dm_ses_enclosure) | SC10 | None |
HP SureStore Disk System:
Supported by High-Availability Storage System Monitor (dm_ses_enclosure) | 2300 | None |
HP SureStore Disk System:
Supported by High-Availability Storage System Monitor (dm_ses_enclosure) | 2405 | None |
Fibre Channel SCSI Multiplexer Monitor (dm_fc_scsi_mux) supports A3308A HP Fibre Channel SCSI Multiplexer. The monitor
requires firmware version 3840.
Table 2-5 lists the supported Fibre Channel adapters and their requirements.
Table 2-3 Fibre Channel Adapters
| Product | Model/Product Number | Special Requirements |
|---|
HP Fibre Mass Storage Channel
Adapters: Supported by Fibre Channel Mass Storage Channel Adapter
(dm_FCMS_adapter) | A3404A
A3591A
A3636A
A3740A |
| For product
support information, see the IT Resource Center at: http://itrc.hp.com For
information about the monitor, see the monitor data sheet at: http://docs.hp.com/en/diag |
HP Fibre Channel Mass Storage
Channel Adapter: Supported by Fibre Channel Mass Adapter Monitor (dm_TL_adapter) | A5158A
A6684A
A6685A
A6795A |
| For information
about the driver and the STM versions required for the Fibre Channel
host bus adapters, see the IT Resource Center at: http://itrc.hp.com For
information about the monitor, see the monitor data sheet at: http://docs.hp.com/en/diag |
HP Fibre Channel Mass Storage
Adapters Supported by Fibre Channel Adapter Monitor (dm_ql_adapter) | A6826A, A9782A | HP-UX
11i v1 September 2003 release of the Support Tools bundle or later For information about the driver and the STM versions required
for the Fibre Channel host bus adapters, see the IT Resource Center
at: http://itrc.hp.com For information about the monitor, see the monitor data
sheet at: http://docs.hp.com/en/diag |
HP Fibre Channel Mass Storage Adapters Supported by Fibre Channel Adapter Monitor (dm_ql_adapter) | 403619-B21: 2-port 4Gbps PCIe Fibre
Channel Mezzanine Adapter AD000–60002: 2-port 2Gbps
PCIe Fibre Channel Mezzanine Adapter | HP-UX
11i v3 September 2007 release or later For information
about the monitor, see the monitor data sheet at: http://docs.hp.com/en/diag |
HP Fibre Channel Mass Storage Adapters Supported by Fibre Channel Adapter Monitor (dm_ql_adapter) | AD193A and AD194A GigE cards | HP-UX 11i v1 December 2006 release or later For information about the monitor, see the monitor data sheet at: http://docs.hp.com/en/diag |
HP Fibre Channel Mass Storage Adapters Supported by Raid Adapters Monitor (dm_raid_adapter) | A7992A | HP-UX
11i v1 September 2003 release of the Support Tools bundle or later For information about the driver and the STM versions required
for the Fibre Channel host bus adapters, see the IT Resource Center
at: http://itrc.hp.com For information about the monitor, see the monitor data
sheet at: http://docs.hp.com/en/diag |
HP Fibre Channel Mass Storage Adapters Supported by Raid Adapters Monitor (dm_raid_adapter) | AH319A: 4-port PCIe SAS SmartArray P400i
RAID Mezzanine Adapter | HP-UX 11i v3 September
2007 release or later For information about the monitor,
see the monitor data sheet at: http://docs.hp.com/en/diag |
HP SAS Mass Storage
Adapter Supported by SAS Mass Storage Adapter Monitor
(dm_sas_adapter) | SAS_399490-001 | HP-UX 11i v2 June 2006 release or later For information about the driver and the STM versions required
for the Fibre Channel host bus adapters, see the IT Resource Center
at: http://itrc.hp.com For information about the monitor, see the monitor data
sheet at: http://docs.hp.com/en/diag |
HP SAS Mass Storage Adapter Supported by SAS Mass Storage Adapter Monitor (dm_sas_adapter) | 405132-B21 and 405160-B21
- PCIe SAS 399490-001 and 435234-001 - PCI-x SAS | HP-UX 11i v2 June 2007 release or
later For information about the monitor, see the monitor
data sheet at: http://docs.hp.com/en/diag |
Fibre Channel Emulex Adapters Emulex
PCI-e Fibre Channel Adapter monitor (dm_fclp_adapter) | AD299A 1p 4Gb FC (PCIe) AD355A 2p 4Gb FC (PCIe) | HP-UX 11i v2 June
2007 release or later For information about the monitor,
see the monitor data sheet at: http://docs.hp.com/en/diag |
Fibre Channel Emulex Adapters Emulex
PCI-e Fibre Channel Adapter monitor (dm_fclp_adapter) | AD221A: HP PCIe 1p 1000BT Adapter AD222A: HP PCIe 2p 1000BT Adapter AD393A: HP PCIe
2p 1000SX Adapter | HP-UX 11i v3 September
2007 release or later For information about the monitor,
see the monitor data sheet at: http://docs.hp.com/en/diag |
The Fibre Channel Arbitrated Loop Hub Monitor (dm_fc_hub) supports the following models of the Fibre Channel Arbitrated Loop (FC-AL)
hubs.
The FC-AL Hub monitor requires the following device firmware
revisions:
Device Agent Firmware revision 2.14 or later
Hub Controller Firmware revision 3.06 or later
Firmware and installation instructions are available at:
http://www.hp.com/go/softwaredepot
Before using the hub monitor, edit the monitor configuration
file (/var/stm/config/tools/monitor/dm_fc_hub.cfg) to specify the hubs to be monitored.
The Fibre Channel Switch Monitor (dm_fc_sw) supports the following models of Fibre Channel Switch:
Before using the switch monitor, edit the monitor configuration
file (/var/stm/config/tools/monitor/dm_fc_sw.cfg) to specify the switches to be monitored.
The PA-RISC Memory Monitor (dm_memory) supports all system memory on PA-RISC-based systems.
The Itanium Memory Monitor (memory_ia64) supports all system memory on Itanium-based systems.
Table 2-9 lists the system
requirements.
Table 2-4 System
| Product | Model/Product Number | Special Requirements |
|---|
System chassis logs: Supported
by Chassis Code Monitor (dm_chassis). The monitor reads all the chassis logs in the /var/stm/logs/os/ccbootlog file. | Superdome S-Class | This requirement is applicable to HP-UX 11i v1
only. The chassis code logging daemon (cclogd) must be up and running. |
Core hardware (hardware within
the System Processor Unit cabinet), for example, resources associated
with intake temperature. On some systems, other hardware resources,
such as power supplies, are monitored: Supported by Core Hardware
Monitor (dm_core_hw) | NA | None |
Corrected Machine Checks
(CMCs) experienced by Itanium-based systems: Supported by CMC Monitor
(cmc_em) | NA | None |
Corrected Platform Error
(CPE) Monitor for all Itanium-based systems: Supported by Itanium
Core Hardware Monitor (cpe_em) | NA | HP-UX 11i
v2 or later. |
Core hardware on PA-RISC
and Itanium-based systems, for example, resources associated with
temperature or power supply: Supported by Itanium Core Hardware Monitor
(ia64_corehw) | NA | None |
Low-Priority Machine Checks
(LPMCs) on PA8500-based (PSCX-W) systems: Supported by LPMC Monitor
(lpmc_em) | NA | None |
Intelligent Platform Management
Interface (IPMI) Forward Progress Log (FPL) entries on the system:
Supported by IPMI Forward Progress Log Monitor (fpl_em) | NA | All
Itanium-based systems running HP-UX 11i v2 or later; All PA-RISC-based
systems running March 2003 release of HP-UX 11i v2 or later. The ia64_corehw
monitor must be running. |
System status
(whether the monitored systems are up and running and whether they
have the Online Diagnostics software installed): Supported by System
Status Monitor (sysstat_em) | NA | None |
PCI Express Interface: Supported by Itanium
Core Hardware Monitor (cpe_em) | rx7640 rx8640 SD16B SD32B SD64B | HP-UX 11i v2 December 2007 release or later |
The SCSI123 Monitor (scsi123_em) supports SCSI1, SCSI2, and SCSI3 interface cards on all HP-UX systems.
Table 2-11 lists the requirements of other supported hardware
devices.
Table 2-5 Other Supported Devices
| Product | Model/Product Number | Special Requirements |
|---|
iSCSI Subsystem HP-UX software
solution for iSCSI protocol: Supported by iSCSI Subsystem Monitor
(dm_iscsi_adapter) | NA | HP-UX 11i v2 For information about the driver and the
STM versions required for the Fibre Channel host bus adapters, see
the IT Resource Center at: http://itrc.hp.com For information about the
monitor, see the monitor data sheet at: http://docs.hp.com/en/diag | | | | | NOTE: Starting with the HP-UX 11i v3 March 2008 release, the dm_iscsi_adapter monitor is introduced on HP 9000
and HP Integrity systems. | | | | |
|
All storage arrays: Supported
by Remote Monitor (RemoteMonitor) | | None |
HP UPS (Uninterruptible
Power Systems): Supported by UPS Monitor (dm_ups) | HP Power Trust HP Power Trust II-LR Explorer UPS HP Power Trust
II-MR | The HP-UX monitoring
daemon, ups_mond; this daemon is
delivered on all Series 800 systems but not on S700 systems. |
DS2500 Storage Enclosure Supported by DS2500 Enclosure Monitor (gazemon) | NA | HP-UX 11i v2 June 2007 release or later For information about the monitor, see the monitor data sheet at: http://docs.hp.com/en/diag |
SCSI Tape Devices Supported by SCSI
Tape Devices monitor (dm_stape) | NA | HP-UX 11i v2 June
2007 release or later For information about the monitor,
see the monitor data sheet at: http://docs.hp.com/en/diag |
Printable version
