 |
» |
|
|
|
To view instances and events generated on a managed system,
you must create subscriptions. When you create subscriptions on the Central
Management Server (CMS) using HP SIM, indications are delivered to the CMS whenever an event occurs
on the managed system. This section discusses the following topics: Creating Subscriptions | |
To create subscriptions
using HP SIM, complete the following steps: Enter the following
URL to launch HP SIM on your browser: http://<system name>:<port
number>/ The system name is the name
of the CMS. For example: http://abc.com:280/ The HP SIM home page is launched. To create subscriptions,
select Options-->Protocol Settings-->Global Protocol Settings in the HP SIM
Home page, as shown in Figure 4-1.
The Global Protocol Settings window is displayed, as shown
in Figure 4-2.
In Figure 4-2,
under Default WBEM settings, select Enable WBEM. Click OK to save your settings. Select Configure->Configure
or Repair Agents, as shown in Figure 4-3.
The Configure or Repair Agents window is displayed, as
shown in Figure 4-4.
From the Add
targets by selecting from: list in Figure 3-4, select All Systems to view
and select the systems. Selecting the name of the system enables you to view
indications occurring on the selected system. The list of systems is displayed
in the Select Target Systems window, as shown in Figure 4-5.
To select all
the systems in the network, select the Select “All Systems” itself
check box, as shown in Figure 4-5. Click Apply. The Verify Target Systems
window is displayed, as shown in Figure 4-6.
Select the
appropriate check box to verify the target systems and click Next, as shown
in Figure 4-6. The Enter Credentials window is displayed, as shown in Figure
4-7.
Enter your
credentials in the given fields, as shown in Figure 4-7. Click Next. The Configure
or Repair Settings window is displayed, as shown in Figure 4-8.
On the Configure
or Repair Settings window, click Run Now. The Task Results window is displayed,
as shown in Figure 4-9. The Task Results window states that the Indication
Subscription is successfully created. The next time
an event is generated on the selected system, you can view the event in the
events list.
To obtain a printable
report of the indication subscription details, click View Printable Report.
The report is displayed, as shown in Figure 4-10.
Viewing Indications | |
To view the list of events generated on the selected systems,
complete the following steps: Select All
Events in the left pane of the HP SIM window. The list of events is displayed,
as shown in Figure 4-11.
To view the
details of an event, select the event. The details are displayed at the bottom
of the same window, as shown in Figure 4-12.
To obtain the
printable version of the event details, click View Printable Details at the
bottom of the window. The printable report is displayed in a new window, as
shown in Figure 4-13.
To create subscriptions and view indications using the
CLI, see “Creating Event Subscription Using CLI”“Creating
Event Subscription Using CLI” on page 93. The ProviderName in the Event Details window indicates
the monitor that generated the event. Table 4-1 maps the monitors and providers. Table 4-1 Representation of Monitors | Monitor | Provider |
|---|
| cmc_em | CMC_IndicationProviderIA | cpe_em | CPE_IndicationProviderIA | | dm_core_hw | CoreHardwareIndicationProviderPA | | dm_chassis | ChassisIndicationProviderPA | | dm_memory | MemoryIndicationProviderPA | | disk_em | DiskIndicationProvider | | fpl_em | FPL_IndicationProvider | | ia64_corehw | CoreHardwareIndicationProviderIA | lpmc_em | LPMC_IndicationProviderPA | memory_ia64 | MemoryIndicationProviderIA |
Table 4-2 compares
the EMS Hardware Monitors properties
with the equivalent EMS Wrapper Provider
properties. Table 4-2 Property Representation | EMS Hardware Monitors | EMS
Wrapper Provider |
|---|
| Event Time | EventTime | | Severity | PerceivedSeverity | | Event | EventID | | System | SystemName | | Summary | Summary | | Description of Error | Description | | Probable Cause/ Recommended
Action | ProbableCauseDescription and RecommendedAction (these two are separate fields) | | System Serial Number | SystemSerialNumber | | InquiryVendorID | HWManufacturer | | Physical Device Path | HWLogicalLocation | | InquiryProductID | DeviceModel | | PhysicalDevicePath | DeviceControllerLogicalLocation |
Table 4-3 Command Representation | Task | In
monconfig (Online Diagnostics) | In SFM |
|---|
Adding a monitoring request | # /etc/opt/resmon/lbin/monconfig Enter A at the main menu selection prompt. | # evweb subscribe -C
-n <subscription name> -e <severity> -v <device> -t <destination>
-g <throttling configuration name> | Modifying a monitoring request | # /etc/opt/resmon/lbin/monconfig Enter M at the main menu selection prompt. | # evweb subscribe -M
-n <subscription name> -e <severity> -v <device> -t <destination>
-g <throttling configuration name> | Deleting a monitoring request | # /etc/opt/resmon/lbin/monconfig Enter D at the main menu selection prompt. | # evweb subscribe -D
-f -n <subscription name> | Sending a test event | # /etc/opt/resmon/lbin/send_test_event <monitor
name> | # sfmconfig
-t -<valid monitor name> | | Using the set_fixed utility to change the
status of a device to UP. | # set_fixed
-n <resource name> | # sfmconfig -a -l -t <device name>
-d <device id> | | Viewing details of an event | # resdata -r <resource
name> -R <request id> -a|-m|-u [-n <notify id>] [-h <host name>]
-M <monitor key>] | # evweb eventviewer -E -n <EvArchNo> |
|
Printable version
