Viewing Instances

This section describes the tasks you must perform to view instances. This section discusses the following topics:




	NOTE: The version numbers of the products shown in the figures may be different from the version you are installing.

To obtain information about processors using the CPU Instance Provider, complete the following steps:

On the System Page of HP SIM, click Properties, as shown in Figure 3-14 “System Page”.
Figure 3-14 System Page
The Properties window is displayed. This window provides details about the system.
To view information about the processor status, click the Status tab.
To view information about the status of the processors on the system, select Processor(s).
To view information about the processor configuration, click the Configuration tab. The Configuration window is displayed.
To view information about the configuration of the processors, select Processor(s).




	NOTE: There is no CLI to view information about processors. For more information, see the HP Systems Insight Manager Installation and User’s Guide at: http://docs.hp.com/en/netsys.html

To obtain information about memory using the Memory Instance Provider, complete the following steps:

On the System Page of HP SIM, select Properties, as shown in Figure 3-14 “System Page”.
The Properties window is displayed. This window provides details about the system.
To view information about the memory status, click the Status tab. The Status window is displayed.
To view information about the status of the physical memory, select Physical Memory.
To view information about the memory configuration, click the Configuration tab. The Configuration window is displayed.
To view information about the configuration of the physical memory, select Physical Memory.




	NOTE: There is no CLI to view information about memory. For more information, see the HP Systems Insight Manager Installation and User’s Guide at: http://docs.hp.com/en/netsys.html

This section discusses the following topics:

To view information about the cooling devices on the system, complete the following steps:

On the System Page, select System Management Homepage, as shown in Figure 3-15 “System Page”.
Figure 3-15 System Page
Select Home->System->Cooling under System Status Summary.
Information about cooling devices on the system such as the status, location, and the type of fans is displayed in the Cooling Status window.
To return to the System Management Homepage home, select Home at the top of the window.




	NOTE: There is no CLI to view information about cooling devices. For more information, see the HP Systems Insight Manager Installation and User’s Guide at: http://docs.hp.com/en/netsys.html

To view information about the power supplies, complete the following steps:

On the System Page, select System Management Homepage, as shown in Figure 3-15 “System Page”.
Select Home->System->Power under System Status Summary on the System Management Homepage.
Information about the power status is displayed in the Power Status window.
To return to the System Management Homepage home, select Home at the top of the window.




	NOTE: There is no CLI to view information about power supplies. For more information, see the HP Systems Insight Manager Installation and User’s Guide posted at: http://docs.hp.com/en/netsys.html

This section discusses the following topics:

To view the temperature status of the system, complete the following steps:

Select 2 items not shown under System on the System Management Homepage.
The system page is displayed.
To view the temperature status of the system, select Temperature on the system page.
The temperature status of the system is displayed in the Temperature Status window.
To return to the System Management Homepage home, select Home at the top of the window.




	NOTE: There is no CLI to view information about the temperature status. For more information, see the HP Systems Insight Manager Installation and User’s Guide at: http://docs.hp.com/en/netsys.html

To view the voltage status of the system, complete the following steps:

Select 2 items not shown under System on the System Management Homepage.
Select Voltage on the system page.
The voltage status of the system is displayed in the Voltage Status window.
To return to the System Management Homepage home, select Home at the top of the window.




	NOTE: There is no CLI to view information about the voltage status. For more information, see the HP Systems Insight Manager Installation and User’s Guide at: http://docs.hp.com/en/netsys.html

Technical documentation