Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 HP XC System Software : Installation Guide

Chapter 4 Configuring and Imaging the System
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

spacerspacerspacer
spacer
spacer
  		 
 

Table of Contents

System Configuration and Imaging Overview
System Configuration Process
System Imaging Process
System Configuration and Imaging Log Files
Task 1: Prepare for the System Configuration
Task 2: Change the Default IP Address Base (Optional)
Task 3: Run the cluster_prep Command to Prepare the System
Task 4: Run the discover Command to Discover System Components
Task 5: Define and Set Up Your System Environment
Install Patches or RPM Updates (Required)
Put the License Key File in the Correct Location (Required)
Configure the Interconnect Switch Monitoring Line Cards (Required)
Configure sendmail (Required)
Create the /hptc_cluster File System (Optional)
Create Local User Accounts (Optional)
Override Default User and Group Account IDs (Optional)
Customize Client Node Disk Partitioning (Optional)
Task 6: Run the cluster_config Utility to Configure the System
Task 7: Respond to Configuration Questions
Task 8: Modify SLURM Characteristics (Optional)
Task 9: Run the startsys Utility To Start the System and Propagate the Golden Image
Task 10: Confirm Compute Resources
You Are Done

This chapter contains an overview of the initial system configuration and imaging process (System Configuration and Imaging Overview) and describes system configuration tasks, which must be performed in the following order:



You Are Done
  		 


System Configuration and Imaging Overview  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2003 Hewlett-Packard Development Company, L.P.