General Commands — Boot Console Handler (BCH) These BCH commands are available from all BCH menus. |
BOot [PRI| HAA|
ALT| path] | Boot from the specified path. |
REBOOT | Restart nPartition. |
RECONFIGRESET | Reset the nPartition to allow
Complex Profile reconfiguration; the nPartition remains inactive,
in the shutdown for reconfig state. |
DIsplay | Redisplay the current menu. |
HElp [menu |command] | Display help for the current menu
or the specified menu or command. |
Main Menu Commands — Boot Console Handler (BCH) Commands to find devices, set boot paths (PRI,HAA, ALT), and
access other BCH menus. |
| BOot [PRI |HAA |ALT| path] | Boot from the
specified path. |
| PAth [PRI |HAA |ALT] [path] | Display or
modify a device boot path. |
| SEArch [ALL |cell |path] | Search for boot devices. |
| ScRoll [ON|OFF] | Display or change scrolling capability. |
| COnfiguration | Access the Configuration Menu, which displays
or sets boot values. |
| INformation | Access the information menu, which displays hardware
information. |
| SERvice | Access the Service Menu, which displays service
commands. |
Configuration Menu Commands — Boot Console Handler (BCH) Commands to display or set boot values. |
MAin | Return to the BCH Main Menu. |
| BootID [cell [proc [bootid]]] | Display or set Boot Identifier. |
| BootTimer [0-200] | Seconds allowed for boot attempt. |
| CEllConfig [cell] [ON|OFF] | Configure
or deconfigure the specified cell. |
| COreCell [choice cell] | Display or set core cell choices for the nPartition. |
| CPUconfig [cell [cpu [ON|OFF]]] | Configure or deconfigure the processor
(cpu) on the specified cell. |
| DataPrefetch [ENABLE |DISABLE] | Display or set data prefetch behavior. |
| DEfault | Set the nPartition to predefined (default) values. |
| FastBoot [test][RUN |SKIP] | Display or set boot tests execution (self
tests). |
| KGMemory [value] | Display or set KGMemory requirement. |
| PathFlags [PRI|HAA|ALT]
[value] | Display or set boot path flags (boot actions). |
| PD [name] | Display or set the nPartition
name. |
ResTart [ON|OFF] | Set nPartition restart policy. |
TIme [cn:yr:mo:dy:hr:mn:[ss]] | Read or set the real time clock, the local nPartition date/time
setting. The BCH time is set and presented in GMT (Greenwich mean
time). |
Information Menu Commands — Boot Console Handler (BCH) Commands to display hardware information. |
MAin | Return to the BCH Main Menu. |
| ALL [cell] | Display all of the information
available for the nPartition. |
BootINfo | Display boot-related information. |
| CAche [cell] | Display cache information. |
| ChipRevisions [cell] | Display revisions
of major integrated circuits. |
| ComplexID | Display Complex information. |
| FabricInfo | Display Fabric information. |
| FRU [cell] [CPU|MEM] | Display FRU
information |
| FwrVersion [cell] | Display
versions for PDC, ICM, and complex. |
IO [cell] | Display I/O interface
information. |
MEmory [cell] | Display memory information. |
PRocessor [cell] | Display processor information |
Service Menu Commands — Boot Console Handler (BCH) Commands related to nPartition system service tasks. |
MAin | Return to the BCH Main Menu. |
| BAttery [cell] | Display cell battery status. |
CLEARPIM [cell] | Clear the non-volatile processor internal memory (NVM PIM) data for
the nPartition. |
| DimmDealloc [cell] [dimm] [ON|OFF] | Display, deallocate, or re-allocate
the DIMM identified by dimm in cell number
specified by cell. |
| ErrorLog [cell][MEMORY |IO |FABRIC |CELL] | Display
error log information. |
| LanAddress | Display Core I/O LAN station address. |
| MemRead address [len] | Read memory locations scope of nPartition. |
| PDT [cell] [CLEAR] | Display or clear
the memory page deallocation table (PDT). |
| PIM [cell [proc]] [HPMC |LPMC |TOC] | Display the processor internal memory (PIM)
data for the nPartition. |
| SCSI [path [INIT |RATE |TERM |WIDTH |DEFAULT [id]]] | Display or set SCSI device parameters. |
Printable version
