This manual is intended as a reference for those who need
detailed information about NS 3000/iX configuration screens
and their fields. Not all parts of the NMMGR screens set are described
in this manual. The following paragraphs describe where to find
information about other aspects of NMMGR and network configuration.
The planning you should do before attempting to configure
a network is discussed in the HP e3000/iX Network Planning
and Configuration Guide.
An introduction to the generic use of the NMMGR utility, including discussions
of the first levels of selection menus and of the utility screen branch,
can be found in Using the Node Management Services (NMS) Utilities.
The NMMGR screens that are associated with configuring the
terminal, printer, and other serial device connections made through
the Datacommunications and Terminal Controller (DTC) are described
in Configuring Systems for Terminals, Printers, and Other
Serial Devices.
The network adapter cards are installed in various I/O slots
of the system. Refer to Appendix E "Verifying Attached
Devices" in the System Startup, Configuration,
and Shutdown Reference Manual, for the procedure on
how to determine the physical paths of I/O cards installed in the
system.
Printable version
