(S/R)

(RE)STORE ENCOUNTERED EXCESSIVE REWIND ERRORS ON LDEV !

Bad media or drive problem caused too many errors.

Physically dismount bad media and mount new one.

READY TO TRY REWIND FOR (RE)STORE on LDEV ! (Y/N)

Too many rewind errors on previous try.

Mount good media and reply to console query.

STORE/RESTORE ENCOUNTERED UNKNOWN MEDIA ON LDEV !

Media type is incompatible with store subsystem.

Mount compatible media type or update store.

LABEL READ FAIL ON LDEV !. USE ANYWAY?(Y/N)

Media read error while trying to read media label.

Check paper label on media and reply to the console query.

LABEL READ FAIL ON LDEV ! FOR MEDIA !. USE IT?(Y/N)

Media read error on label read with (re)storeset option.

Check paper label on media and reply to console query.

LABEL READ FAIL ON LDEV ! FOR MEDIA !. USE IT?(Y/N)

Media read error on label read with (re)storeset option.

Check the paper label and reply to the console query.

MOUNT NEXT MEDIA FOR RESTORE ON LDEV !

Restore finished the current mounted media.

Mount next media to be restored.

MOUNT MEDIA ! FOR RESTORE ON LDEV !

Restore with restoreset option finished the currently mounted media.

Mount next media on specified ldev.

MOUNT MEDIA ! OF SET ! FOR RESTORE ON LDEV !

Restore with restoreset finished a media from parallal set store.

Mount next media of the specified set on requesting ldev.

DISMOUNT CURRENT MEDIA FOR RESTORE ON LDEV !

A wrong media was mounted for restore on specified ldev.

Dismount wrong media and mount a correct one.

DISMOUNT MEDIA ! FOR RESTORE ON LDEV !

An out of order media was mounted.

Dismount this media and mount a correct one.

DISMOUNT MEDIA ! OF SET ! FOR RESTORE ON LDEV !

An out of order media was mounted for restore.

Dismount wrong media and mount the correct one.

MEDIA LEADER TOO SHORT. DISMOUNT CURRENT MEDIA ON LDEV !

Media error encountered due to insufficient media leader.

Mount media with long enough media leader.

MEDIA ON LDEV ! IS NOT A STORE MEDIA

A non-store media is mounted for restore.

Only store media can be read by NM restore.

MEDIA ON LDEV ! IS PREVIOUS TO REQUESTED MEDIA

An out of order media was mounted for restore.

Dismount this media and mount the correct one.

MEDIA ! ON LDEV ! IS PREVIOUS TO REQUESTED MEDIA

An out of order media was mounted for restore with restoreset option.

Dismount this media and mount the correct one.

MEDIA ! OF SET ! ON LDEV ! IS PREVIOUS TO REQUESTED MEDIA

An out of order media from a parallel storeset was mounted for restore.

Dismount this media and mount the correct one.

INCORRECT MEDIA DISMOUNTED BY RESTORE ON LDEV !

An incorrect media was placed offline by restore.

Unload this media and mount the correct one.

MEDIA ON LDEV ! IS NOT FROM THIS STORE SET

The mounted media is not from the set being restored on this ldev.

Dismount the incorrect media and mount the correct one.

MEDIA ON LDEV ! WAS MOUNTED BUT NEVER WRITTEN

Although the media on the specified ldev was mounted (most likely for a serial store), no data was written to it.

Do not include this media as part of the backup, since it contains no data.

MEDIA ON LDEV ! WAS NOT REQUESTED. USE IT? (Y/N)

Media later than requested was mounted on ldev.

Reply Y if you want to skip media otherwise reply n and mount correct media.

MEDIA ! ON LDEV ! WAS NOT REQUESTED. USE IT? (Y/N)

Media later than requested was mounted along with restoreset option.

Reply Y if want to skip media or else reply N and mount the correct media.

MEDIA ! OF SET ! ON LDEV ! IS WRONG. USE IT? (Y/N)

Media from later set than requested was mounted.

Reply Y if want to skip media else reply y and mount correct media.

MOUNT NEXT MEDIA FOR STORE ON LDEV !

Store finished writing the current media .

Unload current media and mount a new one.

MOUNT MEDIA ! FOR STORE ON LDEV !

Store with storeset option finished writing a media.

Unload the current media and mount a new one.

MOUNT MEDIA ! OF SET ! FOR STORE ON LDEV !

Store with storeset option finished writing a media.

Unload the current media and mount a new one.

STORE IS STARTING TO WRITE NEXT MEDIA ON LDEV !

Store accepted the newly mounted media.

None.

STORE IS STARTING TO WRITE MEDIA ! ON LDEV !

Store with storeset option accepted the newly mounted media.

None.

STORE IS STARTING TO WRITE MEDIA ! OF SET ! ON LDEV !

Store with storeset option accepted the newly mounted media.

None.

MEDIA ON LDEV ! IS PART OF CURRENT STORE SET

Media of the current store command was remounted to be overwritten.

Save this media and mount a blank one instead.

MEDIA ! ON LDEV ! IS PART OF CURRENT STORE SET

Media from current store with storeset option was mounted to be overwritten.

Save this media and mount a blank one.

MEDIA ! OF SET ! ON LDEV ! IS PART OF CURRENT STORE SET

Media of current store with storeset option was mounted to be overwritten.

Save this media and mount a blank one.

MEDIA ON LDEV ! IS BAD. CONTINUE ANYWAY?(Y/N)

The media just mounted gave write errors at some time before this.

Reply Y if you want to retry the media or else reply N and mount a good media.

STORE IS MARKING MEDIA BAD ON LDEV !

Store came accross a write error on this media.

Dismount this media and mount a good one.

STORE IS MARKING MEDIA ! BAD ON LDEV !

Store with storeset option had a write error on specified ldev.

Dismount bad media and mount a good one.

STORE IS MARKING MEDIA ! OF SET ! BAD ON LDEV !

Store with storeset option had a write error on the specified ldev.

Dismount bad media and mount a good one.

RESTORE IS ASSUMING THAT NEXT MEDIA IS ON LDEV !

Media was mounted on ldev out of sequence with restoreset order.

None.

RESTORE IS ASSUMING THAT MEDIA ! IS ON LDEV !

Media was mounted on an ldev out of sequence from restoreset order.

None.

RESTORE IS ASSUMING THAT MEDIA ! OF SET ! IS ON LDEV !

Media was mounted on ldev out of sequence with the restoreset option order.

None.

USE DAMAGED TAPE AS NEXT MEDIA ON LDEV !(Y/N)

The media directory on this media was damaged.

Reply Y if this indeed is the correct media or else reply N and mount the correct one.

USE DAMAGED TAPE AS MEDIA ! ON LDEV !(Y/N)

The media directory on this media was found to be damaged.

Reply Y to console query if this indeed is the correct media or else reply N.

USE DAMAGED TAPE AS MEDIA ! OF SET ! ON LDEV !(Y/N)

The media directory on this media was damaged.

Reply Y to the console query if this indeed is the correct media or else reply N.

FILES LOCKED BY ONLINE STORE ARE NOW FREE FOR READ/WRITE/PURGE

The files specified for an online store have been attached to the logging mechanism.

These files may now been opened for read or write access, or may be purged.

THE MEDIA ON LDEV ! IS ALLOCATED TO SOME OTHER DRIVE

The media that has been mounted belongs to a parallel restoreset that is already being restored on another device.

Dismount this media and mount a piece of media that does not belong to an already allocated restoreset.

MEDIA ! ON LDEV ! IS ALLOCATED TO SOME OTHER DRIVE

The media that has been mounted belongs to a parallel restoreset that is already being restored on another device.

Dismount this tape and mount a piece of media that does not belong to an already allocated restoreset.

MEDIA ! OF SET ! ON LDEV ! IS ALLOCATED TO SOME OTHER DRIVE

The media that has been mounted belongs to a parallel restoreset that is already being restored on another device.

Dismount this tape and mount a piece of media that does not belong to an already allocated restoreset.

FILES OF STORE SET ! WILL BE RESTORED WHEN A DRIVE BECOMES FREE

There are more parallel restoresets to restore than there are devices, so the specified set will be restored once a backup device becomes available.

Information only. When a drive becomes free, this set can be mounted and restored.

STARTING TO RESTORE THE FILES OF STORE SET ! ON LDEV !

The files of the specified store set are now being restored from the specified ldev.

Information only.

LDEV ! SPECIFIED IN THE RESTORESET OPTION IS RELEASED

There are no files to restore from this device, so it is being closed.

Information only.

LABELED VOLUME MOUNTED FOR UNLABELED STORE ON LDEV !.

Labeled volumes can not be used for unlabeled stores.

Dismount this volume and mount an unlabeled media.

DISMOUNT VOLUME OF VOLSET ! FOR RESTORE ON LDEV !

The specified labeled volume is no longer needed by restore.

Dismount the volume from the specified ldev.

DISMOUNT MEDIA ! OF VOLSET ! FOR RESTORE ON LDEV !

The specifieid lableled volume is no longer needed by restore.

Dismount the volume from the specified ldev.

DISMOUNT VOL ! OF VOLSET ! FOR RESTORE ON LDEV !

The specifieid lableled volume is no longer needed by restore.

Dismount the volume from the specified ldev.

FILES OF VOLSET ! WILL BE RESTORED WHEN A DRIVE BECOMES FREE

There are more parallel restoresets to restore than there are devices, so the specified volume set will be restored once a backup device becomes available.

Information only. When a drive becomes free, this set can be mounted and restored.

STARTING TO RESTORE FILES OF VOLSET ! ON LDEV !

The files of the specified volume set are now being restored from the specified ldev.

Information only.

RESTORE ASSUMES THAT NEXT VOL OF VOLSET ! IS ON LDEV !

Even though an error was encountered while reading the label of this volume, the user has instructed that it be used anyway, and restore assumes it is the specified volume.

Information only.

RESTORE ASSUMES THAT MEDIA ! OF VOLSET ! IS ON LDEV !

Even though an error was encountered while reading the label of this volume, the user has instructed that it be used anyway, and restore assumes it is the specified volume.

Information only.

RESTORE ASSUMES THAT VOL ! OF VOLSET ! IS ON LDEV !

Even though an error was encountered while reading the label of this volume, the user has instructed that it be used anyway, and restore assumes it is the specified volume.

Information only.

USE DAMAGED MEDIA AS NEXT VOLUME OF SET ! ON LDEV ! (Y/N)

An error was encountered while reading the label of this volume.

Reply Yes to the console request if this volume should be used anyway. Reply No to cause this volume to be dismounted.

USE DAMAGED MEDIA AS MEDIA ! OF SET ! ON LDEV !(Y/N)

An error was encountered while reading the label of this volume.

Reply Yes to the console request if this volume should be used anyway. Reply No to cause this volume to be dismounted.

USE DAMAGED MEDIA AS VOL ! OF SET ! ON LDEV !(Y/N)

An error was encountered while reading the label of this volume.

Reply Yes to the console request if this volume should be used anyway. Reply No to cause this volume to be dismounted.

MOUNT NEXT MEMBER OF VOLSET ! FOR RESTORE ON LDEV !

Restore needs the next member of the specified volume set.

Find and mount the next member of the specified volume set on the specified ldev.

MOUNT MEDIA ! OF VOLSET ! FOR RESTORE ON LDEV !

Restore needs a specific member of the specified volume set.

Find and mount the requested media on the specified ldev.

MOUNT VOL ! OF VOLSET ! FOR RESTORE ON LDEV !

Restore needs a specific volume from a specific volume set.

Find and mount the requested volume on the specified ldev.

VOLUME OF SET ! ON LDEV ! INCORRECT. USE IT? (Y/N)

An unexpected labeled volume was mounted for restore.

Reply Yes to the console message to have restore use this volume. All files that were on unmounted volumes previous to this one will not be restore. Reply No to cause this volume to be dismounted.

MEDIA ! OF SET ! ON LDEV ! INCORRECT. USE IT? (Y/N)

An unexpected labeled volume was mounted for restore.

Reply Yes to the console message to have restore use this volume. All files that were on unmounted volumes previous to this one will not be restore. Reply No to cause this volume to be dismounted.

VOL ! OF SET ! ON LDEV ! INCORRECT. USE IT? (Y/N)

An unexpected labeled volume was mounted for restore.

Reply Yes to the console message to have restore use this volume. All files that were on unmounted volumes previous to this one will not be restore. Reply No to cause this volume to be dismounted.

MEMBER OF VOLSET ! ON LDEV ! IS NOT A STORE MEDIA

A non-store labeled volume was mounted for restore.

Only store media can be read by NM Restore.

MEDIA ! OF VOLSET ! ON LDEV ! IS NOT A STORE MEDIA

A non-store labeled volume was mounted for restore.

Only store media can be read by NM Restore.

VOL ! OF VOLSET ! ON LDEV ! IS NOT A STORE MEDIA

A non-store labeled volume was mounted for restore.

Only store media can be read by NM Restore.

VOLUME OF VOLSET ! ON LDEV ! IS ALLOCATED TO ANOTHER DRIVE

The volume that has been mounted belongs to a parallel restoreset that is already being restored on another device.

Dismount this volume and mount a volume that does not belong to an already allocated restoreset.

MEDIA ! OF VOLSET ! ON LDEV ! IS ALLOCATED TO ANOTHER DRIVE

The volume that has been mounted belongs to a parallel restoreset that is already being restored on another device.

Dismount this volume and mount a volume that does not belong to an already allocated restoreset.

VOL ! OF VOLSET ! ON LDEV ! IS ALLOCATED TO ANOTHER DRIVE

The volume that has been mounted belongs to a parallel restoreset that is already being restored on another device.

Dismount this volume and mount a volume that does not belong to an already allocated restoreset.

VOLUME NOT MEMBER OF VOLSET ! ; DISMOUNTED BY RESTORE ON LDEV !

The wrong labeled volume has been mounted for this restore.

This volume is being dismounted. The next console message will specify which volume should be mounted.

VOLUME NOT MEMBER OF VOLSET ! ; DISMOUNTED BY RESTORE ON LDEV !

The wrong labeled volume has been mounted for this restore.

This volume is being dismounted. The next console message will specify which volume should be mounted.

VOLUME NOT MEMBER OF VOLSET ! ; DISMOUNTED BY RESTORE ON LDEV !

The wrong labeled volume has been mounted for this restore.

This volume is being dismounted. The next console message will specify which volume should be mounted.

MEMBER OF VOLSET ! ON LDEV ! IS PRIOR TO THAT REQUESTED

A volume which has already be restored from, or which is no longer needed, has been mounted.

Dismount this volume and mount the previously requested volume.

MEDIA ! OF VOLSET ! ON LDEV ! IS PRIOR TO THAT REQUESTED

A volume which has already be restored from, or which is no longer needed, has been mounted.

Dismount this volume and mount the previously requested volume.

VOL ! OF VOLSET ! ON LDEV ! IS PRIOR TO THAT REQUESTED

A volume which has already be restored from, or which is no longer needed, has been mounted.

Dismount this volume and mount the previously requested volume.

VOL ID GIVEN FOR MEMBER OF VOLSET ! ON LDEV ! IS INVALID

The volume id of this volume is incorrect.

Dismount this volume and mount a volume from the specified volume set.

LABEL TYPE CLASH BETWEEN VOLSET ! AND VOLUME ON LDEV !

Either an ANSI labeled volume was mounted when an IBM label was expected, or vice versa.

Mount a type-compatible labeled volume.

LABEL TYPE CLASH BETWEEN VOLSET ! AND VOLUME ON LDEV !

Either an ANSI labeled volume was mounted when an IBM label was expected, or vice versa.

Mount a type-compatible labeled volume.

LABEL TYPE CLASH BETWEEN VOLSET ! AND VOLUME ON LDEV !

Either an ANSI labeled volume was mounted when an IBM label was expected, or vice versa.

Mount a type-compatible labeled volume.

REPLY WITH VOL ID FOR MEMBER OF VOLSET !

A new labeled volume needs a volume id.

Reply to the console message with the new volume id for this volume.

REPLY WITH VOL ID FOR MEDIA ! OF VOLSET !

A new labeled volume needs a volume id.

Reply to the console message with the new volume id for this volume.

VOLUME OF VOLSET ! ON LDEV ! IS BEING MARKED BAD

A media error occurred while writing to this volume. The volume will be marked bad to indicate there was an error while writing to it.

After store has marked this volume bad, dismount it and mount a new volume.

MEDIA ! OF VOLSET ! ON LDEV ! IS BEING MARKED BAD

A media error occurred while writing to this volume. The volume will be marked bad to indicate there was an error while writing to it.

After store has marked this volume bad, dismount it and mount a new volume.

VOL ! OF VOLSET ! ON LDEV ! IS BEING MARKED BAD

A media error occurred while writing to this volume. The volume will be marked bad to indicate there was an error while writing to it.

After store has marked this volume bad, dismount it and mount a new volume.

MOUNT NEXT MEMBER FOR VOLSET ! FOR STORE ON LDEV !

Store has finished writing to the current volume and needs the next volume.

Dismount the current volume and mount the next volume for the volume set on the specified ldev.

MOUNT MEDIA ! FOR VOLSET ! FOR STORE ON LDEV !

Store has finished writing to the current volume and needs the next volume.

Dismount the current volume and mount the next media for the volume set on the specified ldev.

MOUNT VOL ! FOR VOLSET ! FOR STORE ON LDEV !

Store has finished writing to the current volume and needs the next volume.

Dismount the current volume and mount the specified volume for the volume set on the specified ldev.

STARTING TO WRITE TO MEMBER OF VOLSET ! ON LDEV !

Store is being to write to a member of the specified volume set.

Information only.

STARTING TO WRITE TO MEDIA ! OF VOLSET ! ON LDEV !

Store is being to write to a member of the specified volume set.

Information only.

STARTING TO WRITE TO VOL ! OF VOLSET ! ON LDEV !

Store is being to write to a member of the specified volume set.

Information only.

MEMBER OF VOLSET ! ON LDEV ! IS PART OF CURRENT STORE SET

A volume that has already been written to as part of this backup was re-mounted.

Dismount this volume and mount a volume that has not yet been written to as part of this store.

MEDIA ! OF VOLSET ! ON LDEV ! IS PART OF CURRENT STORE SET

A volume that has already been written to as part of this backup was re-mounted.

Dismount this volume and mount a volume that has not yet been written to as part of this store.

VOL ! OF VOLSET ! ON LDEV ! IS PART OF CURRENT STORE SET

A volume that has already been written to as part of this backup was re-mounted.

Dismount this volume and mount a volume that has not yet been written to as part of this store.

OK TO RE-LABEL EXPIRED VOLUME ! (Y/N)

An expired volume with a different volume set id has been mounted for a store.

Reply Yes if it is ok to relabel this volume. Reply No if this volume should not be overwritten.

OK TO RE-LABEL EXPIRED VOLUME ! AS ! (Y/N)

An expired volume with a different volume set id has been mounted for a store.

Reply Yes if it is ok to relabel this volume. Reply No if this volume should not be overwritten.

OK TO RE-LABEL EXPIRED VOLUME ! AS ! (Y/N)

An expired volume with a different volume set id has been mounted for a store.

Reply Yes if it is ok to relabel this volume. Reply No if this volume should not be overwritten.

STORE CANNOT OVERWRITE UNEXPIRED VOLUME ! ON LDEV# \

An unexpired volume was mounted for a store.

Dismount this volume and mount a volume that has expired.

STORE CANNOT OVERWRITE UNEXPIRED VOLUME ! ON LDEV# \

An unexpired volume was mounted for a store.

Dismount this volume and mount a volume that has expired.

STORE CANNOT OVERWRITE UNEXPIRED VOLUME ! ON LDEV# \

An unexpired volume was mounted for a store.

Dismount this volume and mount a volume that has expired.

MEMBER OF VOLSET ! ON LDEV ! HAS INCORRECT HDR LABELS

A volume mounted for restore has incorrect HDR1 labels.

Mount a valid volume of the specified volume set.

MEDIA ! OF VOLSET ! ON LDEV ! HAS INCORRECT HDR LABELS

A volume mounted for restore has incorrect HDR1 labels.

Mount a valid volume of the specified volume set.

VOL ! OF VOLSET ! ON LDEV ! HAS INCORRECT HDR LABELS

An unexpired volume was mounted for a store.

Dismount this volume and mount a volume that has expired.

MAKE UNLABELED MEDIA ON LDEV ! PART OF LABELED SET (Y/N)

An unlabeled media has been mounted for a labeled store.

Reply Yes to the console request if this unlabeled media should be converted to a labeled volume.

MAKE UNLABELED MEDIA ON LDEV ! PART OF LABELED SET (Y/N)

An unlabeled media has been mounted for a labeled store.

Reply Yes to the console request if this unlabeled media should be converted to a labeled volume.

MAKE UNLABELED MEDIA ON LDEV ! PART OF LABELED SET (Y/N)

An unlabeled media has been mounted for a labeled store.

Reply Yes to the console request if this unlabeled media should be converted to a labeled volume.

VOLUME MOUNTED ON LDEV ! WAS NOT REQUESTED

A different labeled volume than the one requested was mounted for a store.

Dismount this volume and mount the requested volume.

VOLUME MOUNTED ON LDEV ! WAS NOT REQUESTED

A different labeled volume than the one requested was mounted for a store.

Dismount this volume and mount the requested volume.

VOLUME MOUNTED ON LDEV ! WAS NOT REQUESTED

A different labeled volume than the one requested was mounted for a store.

Dismount this volume and mount the requested volume.

RESTORE SKIPPING SLT IN PROGRESS ON LDEV !

Restore is skipping over the SLT portion of combined SLT/Store.

Information only.

OK TO RESTORE FILES OF SET ! ON LDEV ! (Y/N)

Restore needs verification that the specified restoreset should be restored from the MO at the specified ldev.

Reply "Yes" to the console message if this is the set that should be restored. Reply "No" otherwise.

ARE ALL FILES AND DATABASES QUIESCED FOR ONLINE BACKUP #! ? (Y/N)

You have specified the ASK parameter to the ONLINE option, requesting that TurboSTORE notify via a console request when the True-Online sync point is about to occur.

Make sure that all non-HP databases and other files are ready for the sync point. Then, reply Y to this request if you want the sync point to occur. If you want to cancel this backup, reply N.

DO YOU WANT TO ABORT THE BACKUP? (Y/N)

You have replied "N" to the ASK request during a True-Online backup.

If you reply "Y" to this message, the backup will abort and will be invalid. If you reply "N" to this message, you will be asked if all files and databases are quiesced for an online backup.

ONLINE BACKUP SYNC POINT STARTING

TurboSTORE is starting to quiesce all databases specified for a True-Online backup.

None required, information only. You may notice a pause in database access during the online sync point for all databases being stored by a 7x24 online backup.

ONLINE BACKUP SYNC POINT FINISHED

TurboSTORE has completed the 7x24 online sync point and has unquiesced all databases.

None required, information only. Users should be able to access quiesced databases now.

ALL NON-STANDARD DATABASES CAN BE UNQUIESCED NOW

The 7x24 online sync point has completed.

If you had to manually quiesce any non-HP databases, they can now be unquiesced.

MOUNT LAST MEDIA FOR RESTORE ON LDEV \

RESTORE needs to read the final media directory from the last media of the backup.

Mount the last media of the backup.

MOUNT LAST MEMBER OF VOLSET ! FOR RESTORE ON LDEV \

RESTORE needs to read the final media directory from the last media of the backup.

Mount the last volume of the specified volume set.

STORE/RESTORE ENCOUNTERED A POWERFAIL ON LDEV !

A powerfail or bus reset occurred on the specified LDEV

If this was reported from STORE, STORE will automatically rewind the current media and rewrite the data. If this is reported by RESTORE, the RESTORE will abort, since RESTORE cannot recover from a device powerfail.

STORE/RESTORE ENCOUNTERED A POWERFAIL ON REMOTE DEVICE FILE "!"

A powerfail or bus reset occurred on the specified remove device

If this was reported from STORE, STORE will automatically rewind the current media and rewrite the data. If this is reported by RESTORE, the RESTORE will abort, since RESTORE cannot recover from a device powerfail.

STORE/RESTORE LOST TAPE TENSION ON LDEV !

While accessing a device, a tape tension lost condition was reported.

STORE try to recover from this situation by rewinding the current media and rewriting the reel. RESTORE cannot recover from such a situation and will abort. Make sure your tape devices are clean.

STORE/RESTORE LOST TAPE TENSION ON REMOTE DEVICE FILE "!"

While accessing a remote device, a tape tension lost condition was reported.

STORE try to recover from this situation by rewinding the current media and rewriting the reel. RESTORE cannot recover from such a situation and will abort. Make sure your tape devices are clean.

WARNING: 'FILES' OPTION HAS BEEN REDUNDANTLY SPECIFIED (S/R 301)

The FILES option was entered more than once.

Information only.

EXPECTED '={maxfiles}' AFTER 'FILES' OPTION.
SYNTAX

'FILES={maxfiles}' (S/R 302)

You did not type the files parameter correctly.

Check the syntax and retype the command.

SPECIFIED MAXFILES VALUE FOR 'FILES={maxfiles}' EXCEEDS THE MAXIMUM ALLOWED. (S/R 303)

The maximum files limit of the files parameter has been exceeded.

Information only.

EXPECTED 'FILES={maxfiles}' WHERE {maxfiles} IS A POSITIVE INTEGER. (S/R 304)

You have specified a negative 'maxfiles' number.

Information only.

'FILES' OPTION CANNOT BE USED WITH THE 'LISTDIR' OPTION. (S/R 305)

The files and listdir options are not allowed on the same command line.

Delete either the files or the listdir options.

'RESTORESET' OPTION HAS BEEN REDUNDANTLY SPECIFIED. (S/R 311)

You entered RESTORESET twice in the command.

Remove one of the RESTORESET options and retype the command.

'RESTORESET' OPTION MAY NOT BE SPECIFIED IN CONJUNCTION WITH A POSITIONAL DEVICE FILE. Ex. 'RESTORE *t;....;RESTORESET=(*t1,*t2)' IS INVALID. (S/R 312)

Restoreset and device file options are not allowed on the same command line.

Delete either restoresest or device file options and retype the command.

EXPECTED '=(device[,,..])[,(device[,...])]' AFTER 'RESTORESET' OPTION. SYNTAX

'RESTORESET=(device[,..])[,(device[,...])]'. (S/R 313)

You did not type the restoreset parameter correctly.

Check the syntax and retype the command.

EXPECTED A '(' TO START A RESTORESET. Ex. 'RESTORESET=(*ta,*tb). SYNTAX

'RESTORE-SET=(device[,...])[device[,...])]' (S/R 314)

You did not include a left parenthesis.

Check the syntax and retype the command.

MAXIMUM NUMBER OF PARALLEL SETS EXCEEDED FOR 'RESTORESET' OPTION. Ex, 'RESTORESET=(*ta),(*tb)' IS TWO PARALLEL SETS. (S/R 315)

You specified too many parallel sets. The maximum is 8.

Specify 8 or fewer parallel sets.

EXPECTED 'device' FILE EQUATION IN RESTORESET. Ex. RESTORESET=(*t
SYNTAX

'RESTORESET=(device[,..])[,(device[,...])]'. (S/R 316)

You did not include a file equation to name the backup device.

Specify a file equation.

MAXIMUM NUMBER OF 'device" FILE EQUATIONS EXCEEDED FOR A SERIAL SET. Ex. RESTORESET = (*t1, *t2,..., *tn) EXCEEDS THE MAXIMUM OF 8. (S/R 317)

You specified too many serial file equations. The maximum is 8.

Specify 8 or fewer serial file equation.

EXPECTED A ')' TO TERMINATE A SERIAL THE 'RESTORESET' OPTION. SYNTAX

'RESTORESET=(device[,...])[device[,...])]' (S/R 318)

You did not include a right parenthesis.

Check the syntax and retype the command.

'RESTORESET' OPTION CANNOT BE USED WITH THE 'LISTDIR' OPTION. (S/R 319)

Restoreset and listdir options are not allowed on the same command line.

Delete either restoreset or listdir option and retype the command.

'RESTORESET' OPTION NOT ALLOWED FOR A SLT/STORE SET (S/R 320)

The restoreset option cannot be used with a combined SLT/ store set tape.

Redo the restore command, using only one backup device, and not specifying the restoreset option.

WARNING: 'PROGRESS' OPTION HAS BEEN REDUNDANTLY SPECIFIED. (S/R 321)

The PROGRESS option was entered more than once.

Information only.

EXPECTED {#minutes} BETWEEN 1 AND 60. SYNTAX

PROGRESS[={#minutes}] (S/R 322)

You did not specify a number within the range.

Specify a number between 1 and 60.

EXPECTED 'PROGRESS={#minutes}' WHERE {#minutes} IS A POSITIVE INTEGER. (S/R 323)

The progress parameter must be greater than zero.

Check your syntax and retype the command.

EXPTECTED '={#minutes}' AFTER 'PROGRESS' OPTION. (S/R 324)

You did not type the progress parameter correctly.

Check the syntax and retype the command.

'STORESET' OPTION CANNOT BE USED WITH 'TRANSPORT' TO MPEv. (S/R 331)

You cannot specify the storeset and transport parameters on the same command line.

Delete either the storeset or the transport parameter from the command line.

'STORESET' OPTION HAS BEEN REDUNDANTLY SPECIFIED. (S/R 332)

You entered STORESET twice in the command.

Delete one of the STORESET options and retype the command.

'STORESET' OPTION MAY NOT BE SPECIFIED IN CONJUNCTION WITH A POSITIONAL DEVICE FILE. EG 'STORE...;*t;STORESET=(*t1,*t2)' IS VALID. (S/R 333)

You mistyped the storeset parameter.

Check the syntax of the storeset parameter and retype the command.

EXPECTED '=(device[,,..])[,(device[,...])]' AFTER 'STORESET' OPTION. SYNTAX

'STORESET=(device[,..])[,(device[,...])]' (S/R 334)

You did not type the storeset parameter correctly.

Check the syntax and retype the command.

EXPECTED A '(' TO START A STORESET. Ex. 'STORESET=(*ta,*tb). SYNTAX

'STORESET=(device[,...])[,(device[,...])]' (S/R 336)

You did not include the left parenthesis in your command.

Check the syntax and retype the command.

EXPECTED 'device' FILE EQUATION IN STORESET. Ex. STORESET=(*ta,*tb
SYNTAX

'STORESET=(device[,..])[,(device[,...])]' (S/R 336)

You did not specify a file equation to name the backup device.

Specify the file equation.

MAXIMUM NUMBER OF 'device' FILE EQUATIONS EXCEEDED FOR A SERIAL SET. Ex. STORESET=(*t1,*t2,...*tn) EXCEEDS THE MAXIMUM OF 8. (S/R 337)

You specify too many serial file equations. the maximum is 8.

Specify 8 or fewer serial file equations.

EXPECTED A ')' TO TERMINATE A SERIAL THE 'STORESET' OPTION. SYNTAX

'STORESET=(device[,...])[(device[,...])]' (S/R 338)

You did not include a right parenthesis.

Check the syntax and retype the command.

'STORESET' OPTION NOT ALLOWED IN SYSGEN/STORE. (S/R 339)

A combined SLT/store set cannot be created by sysgen with the storeset option.

Retype the command without the storeset option, specifying only one backup device.

WARNING: 'TRANSPORT' OPTION HAS BEEN REDUNDANTLY SPECIFIED. (S/R 351)

The TRANSPORT option was entered more than once.

Information only.

'TRANSPORT' OPTION NOT ALLOWED IN SYSGEN/STORE. (S/R 352)

Sysgen cannot created a CMStore format tape.

Remove the transport option from the store options and redo the command.

INVALID TARGET SYSTEM ID FOR 'TRANSPORT' KEYWORD. ONLY ID CURRENTLY VALID IS "MPEXL". IF NO TARGET ID IS SPECIFIED THEN THE TARGET SYSTEM DEFAULTS TO MPEv. SYNTAX: TRANSPORT[=MPEXL] (S/R 354)

An invalid transport id was specified.

Specify a legel transport option and redo the command.

WARNING: 'DIRECTORY' OPTION HAS BEEN REDUNDANTLY SPECIFIED. (S/R 361)

The DIRECTORY option was entered more than once.

Information only.

'DIRECTORY' OPTION CANNOT BE USED WITH THE 'TRANSPORT' OPTION. (S/R 362)

Directory and transport options are not allowed on the same command line.

Delete either directory or transport option and retype the command.

USE OF THE 'DIRECTORY' OPTION REQUIRES (SM) OR (OP) CAPABILITY. (S/R 363)

You do not have system manager (SM) capability or system operator (OP) capability.

Log on to an account with SM or AM, or have your system manager perform the tasks.

'ONVS' OPTION CANNOT BE USED WITH 'TRANSPORT' TO MPEv. (S/R 371)

ONVS and TRANSPORT options are not allowed on the same command line.

Delete either the ONVS or TRANSPORT option and retype the command.

WARNING: 'ONVS' OPTION HAS BEEN REDUNDANTLY SPECIFIED. (S/R 372)

The ONVS option was entered more than once.

Information only.

EXPECTED '=volumesetname[,volumesetname...]' AFTER 'ONVS' OPTION. (S/R 373)

You did not type the onvs parameter correctly.

Check the syntax and retype the command.

INVALID VOLUMESET NAME SPECIFIED FOR 'ONVS' OPTION. VOLUMESET NAME MUST START WITH AN ALPHA "A - Z' AND CONTAIN ONLY ALPHANUMERIC "A-Z, 0-9", "_" AND "." SYNTAX

'ONVS=volumesetname[,volumesetname...]'. (S/R 374)

Volumeset name mispelled or not recognized on the system.

Enter a system recognized volumeset name.

VOLUMESET NAME SPECIFIED FOR 'ONVS' OPTION EXCEEDED THE MAXIMUM ALLOWABLE LENGTH OF 32 CHARACTERS. SYNTAX

'ONVS=volumesetname[,volume