(Subsystem 236)

END OF FILE (FSERR 0)

Error while purging a terminating spooler process' port during cleanup.

The current state and the expected state of the spooling process do not match.

A warning occured during the cleanup of a spooling process.

A warning occured while getting information about a device.

An error occured during spooling of initially spooled devices.

Spooling of initially spooled devices is complete.

Set-up of Spooling Subsystem is complete.

An unexpected escape from an external routine was encountered.

Failed to lock the Spooler Process Information Table.

Failed to unlock the Spooler Process Information Table.

Failed attempt to retrieve information from a SPIT entry.

Failed attempt to update the SPIT entry of a spooler process.

Failed to delete SPIT entry during cleanup of terminating spooler process.

Failed attempt to use HPERRMSG routines to log an error.

Failed attempt to use GENMSG routine to display a spooler msg.

Failed to create the HPSPOOL account in the system directory.

Failed to create the OUT.HPSPOOL group in the system directory.

Failed to create the IN.HPSPOOL group in the system directory.

An unexpected escape was encountered during startup of the spooling subsystem.

Unable to delimit a device name while initially spooling devices.

Unable to convert ldev to device name while initially spooling devices.

Unable to get information about a device while initially spooling devices.

Critical error during setup of spooling system. Cannot use spooling subsystem until the system is restarted.

Error encountered while sending a system shutdown message to the Spooler Monitor's port.

A warning occured while starting the Spooler Monitor process.

The Spooler Monitor received a warning while starting a spooler process.

The Spooler Monitor received an error while purging a port. This is a non-critical error.

An escape to the RECOV block occurred after the spooler process was activated. This is a non-critical warn.

The Spooling system has been shutdown.

The Spooler Monitor received an unexpected escape during normal execution.

The Spooler Monitor could not be created.

Unable to create a spooler process for device \.

Unable to create a port for the spooler process of device \.

Unable to give port ownership to spooler process of device \.

Unable to activate the spooler process created for device \.

An error occurred while the Spooler Monitor was receiving a message on its port.

The Spooler Monitor received an invalid message on its port.

The Spooler Monitor was asked to create an invalid type of spooler process.

The Spooler Monitor was unable to lock the SPIT table.

The Spooler Monitor was unable to unlock the SPIT table.

The Spooler Monitor received an error while retrieving information from the SPIT table.

The Spooler Monitor received an error while updating an entry in the SPIT table.

The Spooler Monitor received an error while deleting an entry from the SPIT table.

The Spooler Monitor received an error during initialization.

The Spooler Monitor received an error during shutdown of the spooling subsystem.

The Spooler Monitor returned from shutdown, an event that should never occur.

You cannot run the Spooler Monitor (SPOOLMOM) as a user program.

The Spooler Monitor has entered code that should never be executed in normal situations.

Unexpected error (escape) returned from other subsystems.

Cannot find the SPIT KSO number.

Cannot lock the SPIT.

Cannot unlock the SPIT.

Cannot allocate new entry in the SPIT.

Cannot find the entry with the given device name in SPIT.

Entry with the given device name already exists in SPIT.

The given keyword is missing from the SPIT get/put interface.

Keyvalue is not passed to the SPIT get/put interface.

The given keyword is not a valid keyword for the SPIT get/put interface.

SPIT get/put interface allows only 20 key pairs, the given key index somehow is out of range.

Cannot create object for building SPIT.

Cannot create SPIT because of symbol table management error.

Cannot delete the given entry from SPIT.

The kind of process passed to SPIT interface is illegal, it must be either input or output.

Cannot send an active spoolfile message due to some error condition.

Cannot start a spooler process for an initially spooled device.

Cannot create port for the spooler MOM process.

Cannot initiate the spooler MOM process.

Cannot initiate the spooling subsystem.

Cannot create the spoolfile directory.

Cannot create the HPSPOOL accounting structure.

Spooler internal error occurred, cannot update device information.

Invalid 'DISP' specified, "SPSAVE" OR "PURGE".

Device "\" must be a printer.

Global queues or queues for device "\" must be open.

Global queues or queues for a device in class "\" must be open.

Device "\" must be spoolable for output.

A device in class "\" must be spoolable for output.

Device "\" must be spooled for output.

A device in class "\" must be spooled for output.

SPSAVED spoolfile "!" cannot be deferred.

A spoolid wildcard of the form @, I@, OR O@ was expected.

! warnings occurred.

No spoolfiles available for this spooler to process.

Attempted to remove an output spoolfile from a queue when it's not on one.

During recovery of a file still being CREATED when the system was interrupted, could not recover all data out to the file's limit.

The creator of the spoolfile did not have access to the target device during a "RAW CREATE". The spoolfile was created, but it was put in the DEFER state.

The system has finished rebuilding the output spoolfile directory.

At boot time, the system is allowed to come completely up while the output spool file directory continues to be rebuilt. This message indicates that that process has finished.

None. Informational message.

Attempted to retrieve an invalid/non-existent spoolfile attribute.

Attempted to SET an invalid/non-existent spoolfile attribute.

Internal error sequentially reading spoolfile directory entries. Possible spoolfile directory corruption.

Cannot specify both spoolfile id and UFID as file selectors.

Must specify either a spoolfile id or a UFID as a file selector.

The GETINFO intrinsic reported an error to the process rebuilding the output spoolfile directory.

Progen passes information to the process that rebuilds the output spool file directory. That process retrieves it with the GETINFO intrinsic, but the intrinsic call failed.

To recover existing spool files, STORE (;PURGE) them to tape and RESTORE them. Or SPOOLF @.OUT.HPSPOOL;PRINT them (then delete the original files). Files which were incomplete when the system was taken down may not print correctly.

Cannot find a spoolfile directory entry which is expected to exist.

Must specify either the input or output spoolfile directory.

Cannot specify both the input and output spoolfile directories.

Cannot lock the GUFD spoolfile management resource while the SPFDIR resource is locked, may cause a deadlock.

Failure occurred re-inserting an SPFDIR entry whose search key(s) have been altered. May indicate SPFDIR/disc space shortage or corruption.

Could not add an SPFDIR entry, the directory is full.

Failure attempting to gain exclusive access to a spoolfile's label and label extensions.

Could not find a spoolfile directory entry for the given UFID and directory (input or output SPFDIR).

Failure attempting to lock either the input or the output spoolfile directory.

Failure attempting to unlock either the input or the output spoolfile directory.

Unable to obtain the starting address of a spoolfile directory.

The spoolfile management architected interface routines encountered an unexpected state.

Could not gain exclusive access to a spoolfile's label and label extensions.

Could not release a spoolfile's label from exclusive access.

JOB/SESSION tried to delete a STDIN spoolfile not in the READY state.

Deletion of a spoolfile directory entry, specified by its search key, failed.

Tried to delete a STDIN spoolfile using :SPOOLF ;DELETE. Such files can only be deleted with the ABORTJOB command on the file's associated job.

Duplicate SPFDIR entry, its primary and secondary key values match those of an existing SPFDIR entry.

No spoolfile exists with the given name or UFID.

FCLOSE of spoolfile failed.

Internal error mapping from spoolfile directory entry handle to its address.

Unmatched ITEM NUMBER or ITEM in call to Spoolfile Management architected interface.

Spoolfile Management encountered an unexpected escape or trap.

Could not create a virtual object to hold the input spoolfile directory.

Could not create a virtual object to hold the output spoolfile directory.

Could not create input spoolfile directory symbol table.

Could not create output spoolfile directory symbol table.

Could not create a virtual object to hold output spoolfile queue entries.

Could not create output spoolfile queue head symbol table.

Could not re-open a spoolfile already opened by the current process.

Could not gain access to the label of a file already opened by the current process.

FCLOSE of a spoolfile failed.

Read or write of a spoolfile's label extension failed.

Spoolfile does not exist on any of the volumes currently mounted.

Low-level open of spoolfile failed due to file descriptor allocation limitations.

System error performing low-level open of spoolfile.

The spoolfile was still in the CREATE state when the system was interrupted. It could not be recovered, and has been deleted.

Infinite loop corruption detected in output spoolfile directory. Reboot your system to rebuild the directory. If the problem recurs, CONTACT YOUR SE.

Unknown error performing low-level open of spoolfile.

Output spoolfile has invalid state.

Attempt to add a new output spoolfile queue head entry failed due to existence of a queue head for the same output device or class.

Output spoolfile queue head table overflow. CONTACT YOUR SE.

Output spoolfile queue corruption detected. Invalid link to a queue's first entry. CONTACT YOUR SE.

Output spoolfile queue corruption detected. Invalid forward link. CONTACT YOUR SE.

Output spoolfile queue corruption detected. Invalid backward link. CONTACT YOUR SE.

Unexpected escape encountered inserting an output spoolfile into a spoolfile queue.

Could not find the device or class queue head entry matching the target device or class of an output spoolfile.

Could not remove a spoolfile from the spooling queues.

Could not retrieve the address of a workarea created for spooling subsystem command execution.

Could not create a spooling command/AIF work area.

Could not expand a spooling command/AIF work area.

Could not deallocate a spooling command/AIF work area.

Directory error while preparing to retrieve file system directory information for a set of spoolfiles.

Directory error while retrieving file system directory information for a set of spoolfiles.

Unknown/invalid spooler process type.

Encountered transaction management error while updating creator of an output spoolfile in its label and label extension.

Encountered error writing changes to an output spoolfile's file label extension when changing its creator.

When changing creator of an output spoolfile in its label and label extension, the changes to these structures were aborted because a user transaction under which these system transactions occurred was aborted.

SPOOLF ;PRINT encountered an error reading source file.

SPOOLF ;PRINT encountered an error writing to target file.

You cannot SPOOLF ;PRINT a Private output spoolfile.

You cannot SPOOLF ;SPSAVE a Private output spoolfile.

You cannot SPOOLF ;DEFER a spoolfile in the PROBLEM state unless you also ALTER it to a valid target device/class.

You cannot SPOOLF ;DEFER an output spoolfile which has already been printed and has moved to the 'SPSAVE' state.

You cannot alter the output priority of a spoolfile in the SPSAVE state.

You cannot alter the number of copies of a spoolfile which is either Private or in the SPSAVE state.

You cannot alter the target device/class of a spoolfile in the SPSAVE state.

SPOOLF ;ALTER or SPOOLF ;DELETE of more than one spoolfile is disabled until the output spoolfile directory has been rebuilt following a system startup.

You entered SPOOLF [O]@; ALTER or DELETE while the output spoolfile directory was still being rebuilt. This is not allowed because the command could miss some files which had not yet been inserted into the directory.

This situation only occurs for a few minutes following system startups. Try your command again a few minutes later.

The specified or defaulted target device/class does not exist, is not output spoolable, or does not have its spooling queues open.

Unable to obtain file information, the FFILEINFO intrinsic failed.

The specified file is not a spoolfile.

You tried to SPOOLF ;PRINT an empty file.

SPOOLF ;PRINT aborted by BREAK.

Could not change the STDLIST device in JOB/SESSION tables.

File does not exist or could not be created.

SPOOLF ;PRINT -- valid range of copies is 1 to 65535.

SPOOLF ;PRINT -- valid range of priorities is 0 to 14.

Cannot open the file for exclusive access because it is already open.

The specified lockword does not match the lockword on the file.

You cannot UNDEFER a spoolfile in the PROBLM state.

You cannot UNDEFER a spoolfile in the SPSAVE state.

You cannot alter the attributes of an input spoolfile.

You cannot delete an ACTIVE ":DATA" input spoolfile, that is, one currently being submitted via the STREAM command.

You cannot delete an output spoolfile which is in the CREATE state.

You cannot delete an input spoolfile which is in the OPEN state.

Only output spoolfiles can be SPOOLF ;PRINT'ed.

You cannot SPOOLF :PRINT an input spoolfile.

The source file for a SPOOLF :PRINT has no target device or class to use as a default, therefore you must specify one with the command.

The defaulted target device (taken from the source spoolfile of a SPOOLF :PRINT command) is not a valid output spooled device.

Could not open the source file for a SPOOLF :PRINT command.

Could not open the target file for a SPOOLF :PRINT command.

The first character of a file lockword must be a letter.

Too many characters were specified for the file lockword.

The file lockword contains a non-alphanumeric character.

Altering the target device of a Private spoolfile requires SM capability.

Could not change the target device of an open STDLIST.

Error encountered checking the target device

Creator of spoolfile does not have access to the target device.

If there is not an ACD on the target device, the accessor must have ND (non-sharable device) capability.

An internal call to JSINFO failed.

The creator of the spoolfile does not have access to the target device on a SPOOLF;DEV= or SPOOLF;UNDEFER. This error is used when a "Spoolid" insert is desired at the SP_AI level.

The user does not have access to the device specified in the label extension of the spoolfile. This error is used when a "file name" insert is desired at the SP_AI level.

The device specified in the label extension of the spoolfile does not have an ACD and the user does not have ND capability. This error is used when a "file name" insert is desired at the SP_AI level.

An invalid DEV keyvalue was specified in the selection equation.

Only = and <> are allowed as relational operators for the DEV selection equation keyword.

An invalid PAGES keyvalue was specified in the selection equation.

The COPIES keyvalue must be in the range of 1 to 65,535.

The PRI keyvalue must be in the range of 0 to 14.

An invalid FILEDES keyvalue was specified in the selection equation.

Only '=' and <> are allowed as relational operators for the FILEDES selection equation keyword.

Only = and <> are allowed as relational operators for the JOBNUM selectioni equation keyword.

An invalid DATE keyvalue was specified in the selection equation.

In the DATE keyvalue of the selection equation, the month must be in the range of 1 to 12.

An invalid year was specified in the DATE keyvalue of the selection equation.

An invalid JOBNUM keyvalue was specified in the selection equation.

An invalid JOBNAME keyvalue was specified in the selection equation.

An invalid FORMID keyvalue was specified in the selection equation.

You must specify an account to use this command.

A valid user name consists of a letter followed by alphanumeric characters.

A valid account name consists of a letter followed by alphanumeric characters.

The user name must contain eight or less characters.

The account name must contain eight or less characters.

The RECORDS keyvalue must be a positive integer.

Only = and <> are allowed as relational operators for the OWNER selection equation keyword.

Internal error while evaluating selection equation, there was no result to return. If this error persists, contact your SE.

The DEV keyvalue must contain eight or less characters.

Valid STATE keyvalues are READY, ACTIVE, OPEN, CREATE, PRINT, PROBLM, DELPND, SPSAVE, DEFER.

Only = and <> are allowed as relational operators for the STATE selection equation keyword.

The SPOOLID keyvalue must contain seven or fewer digits, not including the optional #0 or #1.

The FILEDES keyvalue is too long.

The JOBNUM keyvalue must be in the range of 1 to 16383.

The JOBNAME keyvalue must contain eight or less characters.

The FORMID keyvalue must contain eight or less characters.

Only = and <> are allowed as relational operators for the JOBNAME selection equation keyword.

Only = and <> are allowed as relational operators for the FORMID selection equation keyword.

The SPOOLID keyvalue must be in the range of 1 to 9999999.

The SPOOLID keyvalue must be numeric.

Only = and <> are allowed as relational operators for the SPOOLID selection equation keyword.

The only valid DISP keyvalues are SPSAVE and PURGE.

Only = and <> are allowed as relational operators for the DISP selection equation keyword.

If the "." is specified in user.acct, acct must also be specified.

An internal error occurred while validating selection equation semantics. If the error persists, contact your SE.

Expected either an 'I' or 'O' after the "#".

In the DATE keyvalue of the selection equation, the day of the month must be in the range of 1 to maximum date in month.

The only valid JOBABORT keyvalues are TRUE and FALSE.

Only = and <> are allowed as relational operators for the JOBABORT selection equation keyword.

A stop or shut spooler message was received by the input spooling process.

A BREAK or cntl-Y key was entered by the user during the STREAM command.

An EOF was received while reading from the source file being input spooled.

A record exceeding the maximum record size of 279 characters was read from the source file being input spooled.

The expanded :JOB or :DATA record exceeded the maximum record size of 279 characters.

The continuation rec for the job/data cmnd did not begin with the pseudo colon.

The :JOB or :DATA record failed to logon successfully.

The processing of the :JOB/:DATA record was interrupted before it could logon.

The setting of the spoolfile ID for the JOB's STDIN failed. The job will be flushed.

The scheduling of the JOB failed. The job will be flushed.

The scheduling of the future JOB failed. The job will be flushed.

An error occurred while printing the JOB number/DATA spoolfile ID.

Input spooler, LDEV #\: The spooler did not find a valid :JOB or :DATA command on the current tape volume.

Input spooler, LDEV #\: Device has reported a power failure or other interruption while input spooling.

Input spooler, LDEV #\: The spooler detected a non-fatal condition while performing an internal calculation. Please report the warning number to your support engineer. The spooler will continue.

Input spooler, LDEV #\: The File System reported a warning while acquiring the spooled device. The spooler will continue.

Input spooler, LDEV #\: The Device Allocation subsystem reported a warning while the spooler was retrieving device configuration information. The spooler will continue.

Input spooler, LDEV #\: The Device Allocation subsystem reported a warning while the spooler was updating device configuration information. The spooler will continue.

Input spooler, LDEV #\: A warning occurred while converting the LDEV number to a device name.

Input spooler, LDEV #\: Started.

Input spooler, LDEV #\: Stopped.

Input spooler, LDEV #\: Please mount the first tape volume to be input spooled.

Input spooler, LDEV #\: Please mount the next tape volume to be input spooled.

Input spooling code received an unexpected escape during normal execution.

You cannot run the input spooler as a user program.

Encountered error while using HPFOPEN to open the source file.

The input spooling code received an I/O error while reading from the source file being input spooled.

HPFOPEN to open a new input spoolfile failed.

FCLOSE to close a new input spoolfile failed.

The record read from the source file has more than 279 characters.

I/O error during FWRITE to input spoolfile.

Attempt to deallocate the JMAT entry of a JOB failed.

An undefined state was encountered during the input spooling process.

An undefined record kind was received from the source file.

The source file to be input spooled is not an ASCII data file.

The call to SP_FM_SET reported an error while updating the SPFDIR entry for the input spoolfile.

The FFILEINFO intrinsic reported an error while retrieving information about the input spoolfile.

The GETINFO intrinsic reported an error while retrieving information about the spooled device.

The conversion of the source file ldev to device name failed.

An error occurred while retrieving information about the source device.