 |
» |
|
|
|
|  | |
This marking is evidence of compliance with the EU Radio Equipment and
Telecommunications Terminal Equipment Directive 1999/5/EC and other
applicable EU Directives. This product conforms to ETSI TBR 1,2 for
RS-232 and V.35 interfaces. The Z7340A operates at SELV (Safety Extra Low Voltage) and,
to assure safe and compliant operation, may connect to the telecommunication
network only through an approved isolating device. The product is
designed for use only with HP e3000 servers. Use with any other
system may result in a hazard and thus invalidate regulatory approvals/conformance. DECLARATION OF CONFORMITY according
to ISO/IEC Guide 22 and EN 45014 |
|---|
Manufacturer's name: | Hewlett-Packard
Company | Manufacturer's address: | 19420 Homestead
Road Cupertino, California 95014, USA | declares that the product: | | Product Name: | PCI 8-Port ACC (Advanced
Communications Controller) | | Model Number(s): | Z7340A | | | Product Options: | PCI 8-Port Serial
Card: Z7340A (HP P/N Z7340-68001) Interchange Panels: Z7321A, Z7322A
Cables:
Z7325A, Z7326A, Z7327A | conforms to the following Product Specifications: | | | | Safety: | IEC950:1991+
A1, A2, A3, A4 / EN 60950:1992 + A1,A2,A3,A4, A11 GB 4943-1995 | | EMC: | CISPR 22:1993+A1,
A2 / EN 55022:1994+A1, A2 Class A1 GB 9254-1988 CISPR 24:1997 /
EN 55024:1998: ITE Immunity | | Telecom: | ETSI TBR 1,2 | Supplementary Information: | The product
herewith complies with the requirements of the Low Voltage Directive
73/23/EEC, the EMC Directive 89/336/EEC, and the R&TTE
Directive 1999/5/EC (Annex II) and carries the CE-marking
accordingly. | 1) | The Product
was tested in a typical configuration with Hewlett-Packard information technology
equipment. | | Cupertino, CA, USA,
April 8, 2000 | Office of the Quality Manager | | European Contact for regulatory
topics only: Hewlett-Packard GmbH, Department HQ-TRE, Herrenberger
Straße 130, D-71034 Böblingen (FAX: + 49-7031-14-3143) |
|
Printable version
