Configuration Worksheets [ Configuring and Managing Host-Based X.25 Links ] MPE/iX 5.0 Documentation
Configuring and Managing Host-Based X.25 Links
Configuration Worksheets
Before you start NMMGR, use the worksheets provided here to gather the
necessary configuration information. Make copies of these worksheets and
fill in the parameter information, then use the worksheets to guide you
through configuration in NMMGR.
DTC Configuration Worksheet
Fill out for each DTCyou are configuring.
Click here to view figure.
Figure 2-2. DTC Configuration Worksheet
DTC Card Configuration Worksheet
Fill out for each direct connect card you are configuring.
Click here to view figure.
Figure 2-3. DTC Card Configuration Worksheet
DTC X.25 Card Configuration - Level 1 and Level 2 Worksheet
Fill out for each DTC X.25 Network Access card you are configuring.
Click here to view figure.
Figure 2-4. DTC X.25 Level 1 & 2 Worksheet
DTC X.25 Card Configuration - Level 3 & Miscellaneous Worksheet
Fill out for each DTC X.25 Network Access card you are configuring.
Click here to view figure.
Figure 2-5. X.25 Card Level 3 and Miscellaneous Worksheet
DTC X.25 Card Configuration - System-to-System Worksheet
Fill out for each DTC X.25 Network Access card for which you are
configuring system-to-system connections.
Click here to view figure.
Figure 2-6. X.25 Card Configuration - System-to-System Worksheet
DTC X.25 Card Configuration - Nailed PAD Worksheet
Fill out for each DTC X.25 Network Access card for which you are
configuring nailed PAD connections.
Click here to view figure.
Figure 2-7. X.25 Card Configuration - Nailed PAD Worksheet
DTC X.25 Card Configuration - PAD Security Worksheet
Fill out for each DTC X.25 Network Access card for which you are
configuring PAD security.
Click here to view figure.
Figure 2-8. X.25 Card Configuration - PAD Security Worksheet
MPE/iX 5.0 Documentation
HP 3000 Manuals