HP 3000 Manuals HP 3000 Manuals
DATA CAPTURE DEVICE SPECIFICATIONS MENU
If you select the data capture devices on the Terminal/Language Selection
Menu, the following message will appear at the bottom of the Globals
Menu:
Press NEXT to select HP 3075/6 device specifications
Press NEXT to display the Data Capture (3075/6) Device Specifications
Menu, as shown in Figure 3-27. On this menu you can specify how you want
messages longer than 24 (or 32 for the HP 3081A) characters to be
presented on singleline display. In addition, you can specify which
keyboard light is to be lit if an error is detected, and the device
configuration for the Multifunction and Bar code readers if they were
specified as valid input devices.
Click here to view figure.
Figure 3-27. Data Capture Device Specifications Menu
Fields
Split Message You may specify the number of seconds between screen
Pause (seconds) presentations for messages longer than 24 (or 32)
characters. Enter a value between 1 and 99 in this box
and a NO in the Wait for ENTER box. User and VPLUS/V's
messages will be broken so as not to display part of a
word. This field does not apply to Mini-CRT display.
Default 3 (seconds)
OR Wait for You may also specify that screen presentations for
user to press messages longer than 24 (or 32) characters be displayed
ENTER after ENTER is pressed. Enter a YES in this box and a
zero (0) in the Split Message Pause box. This field
does not apply to Mini-CRT display.
Default NO
Error Light You may specify which keyboard light is to be lit if an
error is detected on the form by the application or by
VPLUS/V. This light will remain lit during the
re-presentation of the form. You may specify any one of
the following: @, A through P.
Default E
Multifunction If you select the Multifunction Reader as an input
Reader: device, you can specify how it should be configured to
accept valid card and badge input. The following
options are available:
HOLES/MARKS The card or badge will have holes or
will be mark sensed.
Default HOLES
Corner Cut The card or badge must be presented
Required with the corner in accordance with the
diagram on the terminal.
Default YES
Clock On/After The card or badge will have clock marks
/NONE after each column of data, or no clock
marks. Valid input is CAD (clock after
data) or NONE (no clocking).
Default NONE
Invalid combinations of the above are Holes with Clock
On data and Marks with NONE.
Bar Code Reader If you select the Bar Code Reader as an input device,
you can specify how it should be configured. The
following options are available:
Format You can specify which bar code format
will be read. Choose one of the
following:
UPC--Universal Product Code
I25--Industrial 2 out of 5
MAT--INTERMEC 2 out of 5 MATRIX code
139--INTERMEC code 39 alphanumeric
bar code *
EAN--European Article Numbering
ILV--Interleaved 2 out of 5
Default UPC
*code I39 is a registered trademark of
Interface Mechanism, Inc.
Disable Check When you specify the bar code reader as
Digit an input device, VPLUS/V configures the
device to require check digits. You
can change this by specifying yes (Y)
in this field.
Default N
Example of how a typical form layout will took displayed on the data
capture devices:
Click here to view figure.
Figure 3-28. Form Layout in FORMSPEC
Click here to view figure.
Figure 3-29. Displayed on Standard Character Set Mini-CRT Screen
Click here to view figure.
Figure 3-30. Displayed on 32 Character One Line Alpha Display Screen
Click here to view figure.
Figure 3-31. Displayed on Large Character Mini-CRT Screen